Catalogue

Newest orders

Filter

Car & MotorcycleToolsMost expensive car Tools

Most expensive car Tools

This page includes the most expensive car Tools, or more specifically all products from the category car Tools sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is GYS Powerduction 50LG, which costs 96,690 Kč incl. VAT. Check it out, you may like it. Or you’ll get inspired.

For Vehicle Technicians

Engine Tools

Body Repair Tools

Car Brake Tools

Undercarriage Repair Tools

Upholstery Tools

Welding Equipment

Jacks & Supports

Pressure Washers

Tools All car Tools

1,946 Results

Mar-pol M66453 O-ring seal set

Gasket - large set of 900 o-rings of various sizes in a practical drawer organizer

1,593,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRnar0225

5.0 1×

ANCEL AS500 OBD-II engine system diagnostics

Diagnostics -, Cable, reading live data

1,590,-

Buy

In stock > 5 pcs

Order Code: AUPR122287

Geko G02577 Bearing puller

Puller for bearings - manual, two-armed, length 58 mm, span 8 - 58 mm, weight 4,703 kg

1,579,-

Buy

In stock 2 pcs at the supplier's

Order Code: AUPRnar0131

Jonnesway AE310111A Ball stud puller 29 mm

Puller for pins - manual, screw length 75 mm, weight 1 kg

1,572,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRnar0074

5.0 2×

SCANGRIP MAG PRO - multi-purpose LED work light, rechargeable

LED Flashlight , 90 - 900 lux, 60 - 600 lm, luminous time: 15 h, charging time: 4 h, Working voltage: 100 - 240 V AC - 50 / 60 Hz, battery: 3.7 V / 2 600 mAh Li-Ion, IP54, 330 g, CRI, 80, 6 000 K, Secondary light technical parameters:2 000 lux, 150 lm, CRI 80, 6 000 K, Package contains: 1x flashlight SCANGRIP MAG PRO, 1x charger, 1x charging cable

1,572,-

Buy

In stock 2 pcs at the supplier's

Order Code: AUPR306421

JONNESWAY Brake Bleeding Kit AE300214

Car Mechanic Tools - Brake bleeder with 1 m hose, ending in a universal, interchangeable hose connector, Brake fluid change kit with 0.75 capacity with magnet, which prevents the container from filling with liquid, universal rubber adapter, 4 adapters with dimensions 21 - 30 mm, 24 - 32 mm, 28 - 37 mm, 32 - 41 mm, working pressure 5-8 Bar (70~110 PSI), waste container capacity 1 litre, tank capacity 0.75 litres, air consumption 160 l/min, 1/4" air connections

1,562,-

Buy

In stock 3 pcs at the supplier's

Order Code: ASTnpm24

Asta A-1020T spring puller

Puller - puller for Mercedes-Benz and Citroen suspension springs, made of chrome-vanadium steel, surface is black and polished, supplied in plastic case

1,560,- 1,642,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPR82480

5.0 1×

GÜDE Electrode welder GE 145 W

Welding Machine - Supply voltage: 230 V~50 Hz; Maximum power input: 5 kVA; Security: 16 A; Rated voltage at no-load operation: 46 V; Recommended material thickness: 1.5 - 4.0 mm; Maximum welding current: 100 A; Current range: 40 - 100 A; Loadmaster: 230 V~20 %; Insulation class: H; Type of cover: IP 21 S; Width of the assembled device in mm: 175; Height of the assembled device in mm: 250; Length of the assembled device in mm: 330

1,559,-

Watch

Currently Unavailable

Order Code: GUDsva001

3 sizes

Jonnesway JAZ-7214Z Pneumatic Hose 15 m, 8 × 12 mm

Car Mechanic Tools - pneumatic, spiral, ferulated, Piliurethane (PU) hose, use in tyre service and industry, dimension: 8 × 12 mm, length: 15m

1,557,-

Buy

In stock 1 pcs at the supplier's

Order Code: AUPRnar0383

STROXX Three-point suction cup for glass, load capacity 90 kg, diameter of handles 120 mm

Glass Suction Cups - three-point, load capacity 90 kg, diameter 120 mm

1,540,-

Buy

In stock 5 pcs at the supplier's

Order Code: AUPRst005

tectake Björn Folding ramp 2 pcs, load capacity 400 kg - Folding Ramp

2 sizes

4.4 12×

tectake Björn Folding ramp 2 pcs, load capacity 400 kg

Folding Ramp - Raid, ergonomic handles, perforated surface, bevelled support ends, material galvanized steel, dimensions 186 × 20 - 22,5 × 4,5 cm, dimensions when folded 103,5 × 24,5 × 12 cm, load capacity of one ramp 200 kg, 2 ramps included

1,530,-

Buy

In stock > 5 pcs at the supplier's

Order Code: CARaaa0449

QUATROS Injector wrenches for diesel trucks 4 pcs Quatros QS20650

Car Mechanic Tools - for assembly and disassembly of diesel injectors, set of 4 pieces in plastic cassette - QUATROS QS20650, Used for loosening or tightening the pressure nut on the injector holder, For example. for Mercedes-Benz, MAN, Setra, Neoplan, etc. Also suitable for some Iveco commercial vehicles, Scania and Renault, Set includes:1x 4-tooth head, Guide 6 edge 32 mm, length 70 mm, thread M14x1,5, for Mercedes-Benz, Neoplan and Setra, 1x 4-tooth head, Guide square 1/2", length 72 mm, 1x 3-tooth head open, length 120 mm, for Mercedes-Benz and MAN, for Mercedes-Benz and MAN

1,529,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRqua043

Condor C.5545 For mounting and dismounting the ball stud

Puller for ball joints

1,529,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRnar0390

Mark-moto WAR193 Adapter for injector puller

Car Mechanic Tools - adapter for injector puller, injectors BMW M51 TDS E34/E36, E38/E39, 2497 m3,105 kw(143K) Common Rail

1,528,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRnar0251

Mark-Moto Pulling tool for removing silentblocks WAR5

Puller for silent blocks - screw length 170 mm, weight 1 kg

1,524,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRnar0293

Mark-moto WAR56 Wrench for fuel system inlet chamber nut

Car Mechanic Tools - fuel chamber nut wrench Mercedes Fiat M24x2

1,524,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRnar0240

Jonnesway AG010247 Folding mat 121 × 45 cm

Workshop Lounger - water, oil and fuel resistant, carrying handle, foldable

1,522,-

Buy

In stock 1 pcs at the supplier's

Order Code: CARaaa0494

QUATROS Wiring harness QS10675

Locking Tool - OPEL 1.6 CDTi ecoFLEX engine timing lock

1,521,- 1,571,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRaret06

4.0 1×

ACI Ramp 1995/200 mm straight galvanized (500 kg per pair)

Motorbike Ramp - it has a neckline, galvanized, length 1995 mm, width 200 mm, load capacity of one pair 500 kg, weight 9,5 kg

1,515,-

Buy

In stock 4 pcs at the supplier's

Order Code: AUPR292623

5.0 1×

Genborx Ball joint and control rod puller VT01390

Puller for pins and steering - manual, two-arm

1,514,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRsta33

QUATROS QS11149 Wheel bearing puller 8-32 mm

Puller

1,509,-

Buy

In stock 2 pcs at the supplier's

Order Code: AUPR58438

GEKO Hydraulic bearing puller, 5t

Puller - hydraulic, gauge: 50-200mm, thread length: 140mm, pliers length: 260mm, color design may vary

1,506,-

Buy

In stock 4 pcs at the supplier's

Order Code: AUPR20074

QUATROS Timing Belt Tensioning Wrench QS50635C

Locking Tool - Wrench for tensioning timing belts, 14 pcs

1,503,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRare39

SATRA/ASTA Renault Opel Nissan 1.5 - 2.5 Dci Satra S-FB2721

Car Mechanic Tools - fixture for locking Renault Opel Nissan 1.5 - 2.5 Dci, application: Renault: Clio II (01-06), Clio III (05-08), Megane (99-03), Scenic II (02-08), Laguna (99-01), Espace, Kangoo, Traffic, Master (00- 06), Modus (04-08), Opel: Movano 1.9 Cdti, 2.2/2.5 Dti (00-06), Vivaro 1.9/2.5 Dti (01-06), Primastar 1.9/2.5 Dci (03-06), Nissan: Micra 1.5 Dci, Primera (02-06), Kubistar 1.5 Dci (03-06), Qashqai (08-09), Note (06-08), Almera (02-06), motors: K9K, F9Q, G9T, G9U -1.5; 1,9; 2,2; 2,5; Di/DTi/CDTi

1,503,-

Buy

In stock > 5 pcs at the supplier's

Order Code: AUPRnar0423

24 more... Top

1 ... 27 28 29 30 31 ... 82