Most expensive car Tools
This page includes the most expensive car Tools, or more specifically all products from the category car Tools sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is GYS Powerduction 50LG, which costs 96,690 Kč incl. VAT. Check it out, you may like it. Or you’ll get inspired.
1,920
Results
Tool Set - Stud extractors 2-8 mm, 6 pcs - JONNESWAY M63106S
Car Mechanic Tools - designed to measure fuel pressure in gasoline injection systems, With the tester you can, among other things, test gasoline engine injection systems and diagnose faults: causes excessive pressure, as well as other irregularities, including: Damaged pressure regulator or fuel line, Clogged fuel return line (or clogged fuel filter), Damaged relief valve or fuel pump, Defects causing vacuum or overpressure, etc., Kit contents: Pressure gauge 0 - 7 bar (0 - 100 PSI), Connector 1/8" - 27 NPT x 1/4" - 18NPT, Connector 1/4" x 1/4" - 18NPT, 1/8" - 24 NPT adapter for serial connection of the tester to 1/4" and 3/8" diameter fuel lines, 1/4" x 2.5" hose, 3/8" x 3.0" hose, Flexible hose 2 pcs, Tightening tapes 2 pcs, Suitcase (colour depends on delivery).
Car Mechanic Tools - 1/2" extendable ratchet, length 30-45 cm, 72 tooth mechanism, quick release, rubberized handle
Service Set - set of universal car plugs 500 pcs, 6-piece tool set, on the nails, in the car, set contains 600 universal autopins and 6 pins for soldering, length 1-4 cm, quantity 600 pieces, material: plastic
Service Set - Tool for manual extension of pipe ends
Service Set for checking engine pressure with pressure gauge. Measurement up to 20 bar, Hose 49 cm, 2 rigid tips, 13 cm long, finished with a rubber band, 4 threaded ends: M10x1.0, M12x1.25, M14x1.25, M18x1.25
Spare Part - Replacement hydraulic cylinder for SX Jack Mini 2T mobile low-profile grab
Workshop Lounger - small, made of soft EVA foam, to protect the knees
Puller for ball joints - manual, double-arm, weight 1,13 kg
Welding helmet - self-dimming, suitable for ARC, TIG, MIG, spot, micro, wire, AC, DC and MMA, viewing dimensions 42 × 92 mm (H×W), blackout response time 0.04 ms, lightening response time from 0.2 to 0.8 s, degree of protection in darkened state DIN 9 - 13, protection level in clear DIN 4, UV/IR protection DIN 16, meets EN 379 standards, EN 166 and EN 175, powered by a solar cell, with two batteries, plastic material, weight 1000 g, blue colour
Brake Piston Press - for mounting and returning disc brake pistons and calipers, universal, 18 parts, material carbon steel
Pressure Meter - kit for testing spark ignition engine pressure and detecting engine leaks, includes analogue pressure gauge 0 - 7 bar and 0 - 100 psi, 3 long flexible hoses with thread, 2 short flexible hoses with free end, 2 attachments, 2 hose clamps, plastic case
Jack - hydraulic, low-profile, load capacity 2500 kg, lift height from 85 to 385 mm, weight 2.85 kg
Welding helmet - self-dimming, suitable for ARC, TIG, MIG, spot, micro, wire, AC, DC and grinding, viewing dimensions 42 × 92 mm (H×W), blackout response time 0.025 ms, lightening response time from 0.2 to 0.8 s, degree of protection in darkened state DIN 9 - 13, protection level in clear DIN 4, UV/IR protection DIN 16, meets EN 379 standards, EN 166 and EN 175, powered by a solar cell, on 2 CR2032 batteries, plastic material, weight 450 g, red colour
519,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
AUPR62562
Brake Piston Press - practical brake piston compressor set SIXTOL BRAKE SET with 18 parts
Car Mechanic Tools - for cleaning piston grooves of accumulated carbon deposits, Equipped with three knife discs with diameters: 2,5, 2, 3, 4, 4,5, 1/4 1,2, 1,5, 1,8, 2,8, 5, 5,5 1/16, 5/64, 3/32, 1/8, 5 / 32, 3/16, By moving the blade on the flat bar, the blade is adjusted to the appropriate diameter of the piston.
Jack - hydraulic, doll, grip handle, load capacity 6000 kg, manual drive, lift height from 188 to 360 mm, dimensions 105 × 110 mm (W×L), weight 4.6 kg
Car Mechanic Tools - 5 pcs, material: Bi-Metal, saw blade body: spring steel SAE-6150, tooth tips: AISI M2 high speed steel, length: 9,4 cm
Tyre mounting lever - to remove the tyres, metal shaft along the entire length, overall length 915 mm, length of working part 710 mm, handle length 205 mm, blade width (flat part) 25 mm
Glass Suction Cups - three-point, load capacity 190 kg, diameter 125 mm, body material plastic, weight 1,42 kg
-7 % off new
509,-
New 549,-
Unsealed - in stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CMP1700
Upholstery Clip - made of plastic and tool steel, designed for disassembly and assembly of car body elements, enables fast, precise and safe installation of the panels, rails and plastic covers, plastic elements resistant to deformation, cracking and weathering, steel tools ensure comfort and safety at work, suitable for professional car repair shops, body and paint workshops and DIY, package contents 1211 clips and pins including pullers and removal tools
508,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CARaaa1186
Car Mechanic Tools - wrench for removing ball joints Peugeot 406, Citroen C5 and C6, mounting 38 mm, height 57 mm, Outer width 60 mm, inner width 52 mm
Chcete doručiť tovar na Slovensko? Prezrite si
Náradie do auta
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Autós szerszámok