PROCRAFT Welding inverter RWI-400 20-200 A
Don't like the alternatives? Choose from the full product list
- Help and manuals
- Specifications
- Photos & Videos 10
- Alternatives 8
- Accessories and suggested products
PROCRAFT Welding inverter RWI-400 20-200 A
Welding Inverter Procraft RWI-400 with vhigh performance IGBTs transistors guaranteeing long trouble-free operation is designed for manual MMA welding. Welding current control in the range of 20-140A allows you to set the optimal parameters when working with different metals and this welding current is currently displayed via the LCD Display. Welding electrodes with a diameter of 2.0 to 6.0 mm can be used. The ARC FORCE, ANTISTICK, HOT START functions guarantee fast and easy welding.
Key Features of the Procraft RWI-400 20-200 A Welding Inverter
- Welding current control in the range of 20- 200 A allows setting of optimal parameters when working with different metals
- Welding electrodes with a diameter of 2.0 to 6.0 mm can be used
- The LCD display shows the current welding current
Functions
- ARC FORCE - stabilization of the ignited welding arc during welding depending on the length of the welding arc. If the electrode sticks when the arc is shortened, the inverter will increase the current. In the case of a long arc, the inverter will reduce the current, allowing time for the electrode to approach the material without the arc going out.
- ANTI STICK - automatic reduction of welding current to a minimum if the electrode sticks, thus the electrode cools down and can then be easily torn off.
- HOT START- facilitates the ignition of the arc by automatically increasing the initial ignition current compared to the originally set welding current value.
Package contents:
Welding inverter Procraft RWI-400, 1× welding shield, 1× cable with electrode holder, 1× cable with grounding pliers and wire brush combined with slag hammer.
Voltage:
220-240 V
Frequency:
50 Hz
Weight:
8kg
Power:
7 kW
Coverage level:
IP21S
Efficiency:
78 %
Specifications
Features
Technology
Dimensions and weight
Technical parameters
Packaging
VEGA TOOLS s.r.o. IČO: 07594470, DIČ: CZ07594470. Křižovnická 86/6, Staré Město, 110 00 Praha. +420 313 033 292, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
