Bentech A100S autonomous siren with solar panel
Bentech A100S autonomous siren with solar panel
The Bentech A100S standalone outdoor alarm is equipped with a PIR sensor that can detect motion at a distance of at least 6 meters (depending on the surrounding environment). If the sensor detects movement, a siren with a volume of 100 dB is triggered, accompanied by a visual alarm in the form of four flashing red LEDs. The detection efficiency is further enhanced by a Fresnel lens that prevents false alarms caused by sunlight interference. You can choose from 5 alarm modes (night or day mode, light-only), so you can easily adapt the functionality of the device to your needs. The Bentech A100S alarm has a waterproof design with IP67 rating, allowing it to be used in harsh outdoor conditions. The device is powered by a built-in solar panel with a power of 0.6 W.
Key features of the Bentech A100S autonomous siren with solar panel
- Autonomous motion detector with PIR sensor is equipped with a siren with a volume of 100 dB
- The device detects motion up to 6 meters (depending on the surrounding environment)
- Distinctive light alarm in the form of 4 flashing red LEDs
- Alarm Bentech A100S has a rugged design with IP67 rating
- You can choose from 5 operating modes (night or day mode, light alarm only, etc. )
- Bentech A100S is equipped with a Fresnel lens to prevent false alarms
- Includes a handy remote control with a range of up to 10 metres
Easy installation and operation
The Bentech A100S solar panel siren is designed to be installed on a wall or other smooth surface using the included mounting plates and bolt sets. For maximum detection, it is advisable to place the device in a location with a good view of the surrounding area. The package also includes a handy Remote with a range of up to 10 metres, which allows you to conveniently turn the alarm on or off or set the operating mode.
Package contents
- Autonomous siren Bentech A100S
- Mounting plate and screw set
- Remote control
- Handbook
Technical specifications:
Frequency: 433 MHz
Sensor: PIR
Degree of coverage: IP67
Volume: minimum 100dB within 1 metre
Battery type: 3.7 V × 600 mAh
Type of solar panel: polysilicon (5 V × 0.6 W)
Detection distance: minimum 6 metres (depending on the environment)
Remote control range: up to 10 metres
Horizontal detection angle: 110°
Vertical detection angle: 20°
Solar charging time: 6 - 8 hours
Dimensions: 135 × 65 × 70 mm
Weight: 172g
Number of LEDs: 4
Specifications
Use
Connectivity
Connection
Detection Type
Notification
Package contents
Czech Partners Group s.r.o., Hartigova 1206/87, 130 00 Praha 3 www.bentech.eu, [email protected], +420 222 310 006
Specifications can be changed without notice. Images are for illustrative purposes only.
