Cooler Master BlueIce II RT-UCL-L4U1 - aktivní chladič s HeatPipe na chipset
Cooler Master BlueIce II RT-UCL-L4U1 - aktivní chladič s HeatPipe na chipset
Discontinued
Cooler Master BlueIce II RT-UCL-L4U1 - aktivní chladič s HeatPipe na chipset
Universal Executive radiator designed for Northbridge čipsety is equipped with technology HeatPipe guaranteeing high quality heat removal and active fan size 40 x 40 mm with a speed of 4 500 revolutions per minute.It is located between the ribs coolers, which are made of aluminium.Base to ensure contact with čipsetem consists of copper.The entire radiator is very quiet and its service life reaches 20 000 hours.
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate and form plyném rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Material:
Ribs:Aluminium
Platform:copper
The size of the fan:
40 x 40 x 10 mm
Speed speeds:
4.500 revolutions / minute
Airflow:
4.5 CFM
Life fan:
20.000
Noise:
22 to 26 dBA
Size:
60 x 47 x 69 mm
Weight:
140 g
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate and form plyném rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Material:
Ribs:Aluminium
Platform:copper
The size of the fan:
40 x 40 x 10 mm
Speed speeds:
4.500 revolutions / minute
Airflow:
4.5 CFM
Life fan:
20.000
Noise:
22 to 26 dBA
Size:
60 x 47 x 69 mm
Weight:
140 g
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
