Dražice OKC 125

Don't like the alternatives? Choose from the full product list
Dražice OKC 125
Combined storage heater with a capacity of 120 liters intended for hanging on the wall. It is suitable for hot water in buildings with hot water central heating on gas or solid fuel in winter and hot electricity heating season with utilizing low tariff electricity (night). The manufacturer retains the entire history of manufacturing the same spacing of anchor bolts 450 mm, so there is no problem to replace the old, retired heater.
Heating option:
Electricity:
Ceramic heater controlled by the operating thermostat and protected by a safety thermostat (thermal fuse). Temperature range 5-74 degrees Celsius. Supply voltage 230 V/50 Hz 1-PE-N/AC. Electrical protection IP 45 allows placement of heaters in zone 1 according to ČSN 33 2000-7-701.
Exchanger:
The heater can be connected to an external hot water source with a maximum temperature of 110 degrees Celsius and a pressure of 1 MPa. According to the power source is necessary to assign the appropriate output heater with heat exchanger. Heat works in a forced circulation and the gravity system. The sensor control heating water can be inserted into a common pit with sensors wiring.
For warranty information and application defects:
- Equipment requires professional installation. If the equipment is not installed by a professional company (after verification by the manufacturer is sufficient invoice from a plumber), losing the warranty.
- In the case of defective boiler boiler must NOT be taken down, service is performed onsite.
- In the event that this is unjustified complaint (i defect which is not reflected) is charged to the customer exit.
Specifications:
Volume:
120 l
Maximum operating pressure of the vessel:
0.6 MPa
Voltage:
230
Input:
2000 W
Electrical protection:
IP 45
Heater length:
1046 mm
Average heaters:
524 mm
Maximum weight of heater without water:
58 kg
Heating time electricity of 10 ° C to 60 ° C:
3.8 hours
Maximum operating pressure exchanger
1 MPa
Heating surface:
0.68 m2
Rated output for heating water temperature of 80 ° C and a flow of 310 l/hr:
9000 W
Time of heat exchanger from 10 ° C to 60 ° C:
55 min
Rated output for heating water temperature of 80 ° C and a flow of 720 l/hr:
17000 W
Time of heat exchanger from 10 ° C to 60 ° C:
28 min
Heat loss:
KWh/24 1.09 pm
Energy efficiency class:
C
Specifications
Location
Heating housing type
Features
Volume
Power consumption
Dimensions
Specifications can be changed without notice. Images are for illustrative purposes only.

