DXRacer Drifting Summer

Perfect features and design

Upholstery – the latest generation of NEO leatherette (EPU leather) is unrivalled in terms of durability, flexibility and wear resistance. It has been tested to outperform regular PU leather, as it combines the best features of various leatherette samples. It is smooth and pleasant to the touch, highly resistant to abrasion, cold, stains or fading, and easy to clean. It also includes an adjustable headrest and adjustable lumbar support, which provides ideal support for the spine. Drifting features adjustable multifunctional 3D armrests with a soft surface. They are controlled by buttons on the outside of the armrests and then by the rests themselves. You can adjust the height, angle (15°), and depth (forwards/backwards). The Drifting gaming chair is designed to meet the demands of discerning PC users, computer gamers, as well as office workers and managers.

TILT rocking mechanism

The backrest tilts backwards and forwards together with the seat. It can only be locked in the basic (upright) position. It is controlled by a lever on the right side; just pull it out to the side to activate the function. If you want to stop rocking, return to the basic sitting position. Push the right lever back in and the rocking will stop. The rocking stiffness, or rocking force, is adjusted according to your weight. This is controlled by a rotary knob under the seat. The backrest angle can be adjusted between 90–135 degrees using the lever on the right side of the backrest, just like in a car seat. 90° for work, 135° for relaxing. The height is adjusted according to your height and leg length. Ideally, your feet should be flat on the floor for most of the time, with your knees bent at an angle of 90–120 degrees. This is controlled by the lever on the right side.

DXRacer is the premium choice for all PC users

The DXRacer DRIFTING gaming chair has a height-adjustable headrest that supports the cervical spine, relaxes the neck and relieves pressure. Its wide design provides plenty of room to rest your head and is filled with high-density memory foam. The headrest includes a premium gel layer with cooling particles that ensure coolness and provide excellent air circulation and breathability. DXRacer gaming chairs are used by gamers all over the world, including top professionals. They are featured at tournaments such as LCK, UMG, MLG and in the Czech Republic also at 4GAMES, the Czech Republic Championship in Computer Games, and HITPOINT FINALS. In the Czech Republic, DXRacer cooperates with the eSuba gaming organisation. 

Package contents:
Chair, assembly instructions

Chair controls:
Chair and seat height – press the lever down lightly
Rocking – pull the lever out to the side; to stop rocking, push it back in (locks in the basic position)
Rocking stiffness – rotary knob to adjust the rocking stiffness

Chair assembly:
After unpacking, insert the castors into the arms of the base (five holes in the lower part of each arm are for the castors). Insert the piston into the hole for the piston, after moving it around a bit first. Mount the mechanism to the underside of the seat (place the seat upside down to make it easy to handle, preferably on a mat or a table with a raised surface). Mount the armrests to the underside of the seat. Attach the backrest to the seat. Place the seat with the backrest and armrests onto the piston with the base and castors. Check that you have tightened all the screws sufficiently. Done, you can now take a seat.   

Please note:
Not recommended for people over 185cm tall.

Technical specification:
Seat height: 44–54cm
Weight: 23kg
Armrests: 3D adjustable
Product height: 122–132cm
Dimensions: 70 × 57cm (W × D)
Base/frame: aluminium
Mechanism: TILT mechanism
Maximum load capacity: 125kg
Castor pin diameter: 11mm
Castor diameter: 75mm
Seat width: 54cm
Material: synthetic leather
Recommended user height: 155–185cm
Package dimensions: 80 × 60 × 37cm