Nexus XiR-2300
Don't like the alternatives? Choose from the full product list
Nexus XiR-2300
Discontinued
Nexus XiR-2300
Executive radiator designed for AMD and Intel processors.Deductions heat from the surface of the processor provides a passive part měďenou base consisting of four heatpipe and aluminum tubes žebrováním.Ochlazení strong stream of air provides 92 mm fan with variable speed drive between 1200 - 1500 revolutions per minute.Fan can connect via 4-pin PWM power connector.
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature at which steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Supported slot:
AMD:Socket AM2 / 754 / 939 / 940
Intel:Socket 775
Material:
Copper, aluminium
HeatPipe tube:
Number:4
Material:copper
Shape:U
Fan:
Technology regulation:PWM
Dimensions:92 x 92 x 25 mm
Speed:1200 - 1500 rev./ min.
Noise:15 to 24 db
2nd orange LED
Dimensions:
106 x 122 x 111 mm
Weight:
382 g
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature at which steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Supported slot:
AMD:Socket AM2 / 754 / 939 / 940
Intel:Socket 775
Material:
Copper, aluminium
HeatPipe tube:
Number:4
Material:copper
Shape:U
Fan:
Technology regulation:PWM
Dimensions:92 x 92 x 25 mm
Speed:1200 - 1500 rev./ min.
Noise:15 to 24 db
2nd orange LED
Dimensions:
106 x 122 x 111 mm
Weight:
382 g
Note:
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
