This page includes the most expensive drills Bosch, or more specifically all products from the category drills Bosch sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is BOSCH SDS max-9 Break Through drill bit 80 × 850 × 1000 mm 1.618.596.462, which costs 13,201 Kč incl. VAT. Check it out, you may like it. Or you’ll get inspired.
740
Results
Drill Bit - conical shape, for masonry, with a diameter of 6,5mm and a length of 465mm, SDS Plus mounting, made of Hard metal,
Drill Bit - conical shape, for masonry, with a diameter of 8mm and a length of 610mm, SDS Plus mounting, made of Steel,
Drill Set - spiral, diameter 4,5 mm, length 80 mm, working length 47 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-Co
Paper Punch - wrenching, diameter 86 mm, wood determination, metal and plastic, SDS Plus clamping, Material HSS-Co 8%
Drill Bit - conical shape, for metal, with a diameter of 4,2mm and a length of 75mm, Cylindrical Drill Bit mounting,
Drill Bit - conical shape, for masonry, with a diameter of 18mm and a length of 300mm, SDS Plus mounting, made of Steel,
Amazing Deal
569,-
Save 79,-
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC748v14
Drill Set - for metal and cast iron, conical shape, clamping system cylindrical shank, 5 pieces per pack
Drill Bit - conical shape, for masonry, with a diameter of 20mm and a length of 300mm, SDS Plus mounting, made of Steel,
Bit - cross PZ, size PZ2, standard material S2
Bit - cross PZ, size PZ1, standard material S2
Bit - cross PZ, size PZ3, standard material S2
Bit - cross PH, size PH1, standard material S2
Bit - torx TH, size T20, standard material S2
Bit - torx TH, size T30, standard material S2
Bit - size T25, for plasterboard, material S2
Bit - torx TH, size T15, standard material S2
Bit - cross PH, size PH2, standard material S2
Drill Set - spiral, diameter 8,2 mm, length 117 mm, working length 75 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
Drill Bit - conical shape, for masonry, with a diameter of 16mm and a length of 460mm, SDS Plus mounting, made of Steel,
Drill Set - for wood, conical shape, hexagon clamping system, 5 pieces per pack
Sanding Brush - disc, to remove rust, cleaning, on metal, material steel, crimped wire, max. 8500 rpm, clamping with M14 thread, brush diameter 115 mm
Drill Bit - conical shape, for masonry, with a diameter of 11,5mm and a length of 136mm, made of Hard metal,
Sanding Brush The pot wire brush provides a good rough surface finish. It features a braided wire for powerful steel cleaning. This brush is suitable for removing rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Chcete doručiť tovar na Slovensko? Prezrite si
Vŕtačky
Für den Versand nach Deutschland, besuchen Sie bitte
Bohrmaschinen
Für den Versand nach Österreich, besuchen Sie bitte
Bohrmaschinen
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Fúrógépek