This page includes the most expensive work Tools Bosch, or more specifically all products from the category work Tools Bosch sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
2,072
Results
Drill Set - 5 wood drill bits: diameter 4-8mm, 5 metal drill: HSS diameter of 2-5mm, 5 stone bits: diameter 5-8mm, 3 sockets: 08/07/10mm, 1 adapter for socket wrench, 1 universal magnetic bit holder, 1 countersink bit, plastic case
409,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC701
Sanding Brush The Clean for Metal wire brush provides a very fine surface finish. The Cup Wire Brush features a crimped wire with a brass finish for less and medium-duty cleaning. It is suitable for removing coatings, rust and paint from medium and large ferrous and non-ferrous surfaces. This disc wire brush is also suitable for roughening, matting and cleaning of formwork boards and tiles. Brass-coated wires protect the brush against corrosion. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. Designed for use in angle grinders.
Drill Bit - conical shape, for masonry, with a diameter of 16mm and a length of 215mm, SDS Plus mounting, made of Steel,
Diamond Disc - cutting, suitable for concrete and brick, segmented, diameter 180 mm, installation hole 22.23 mm, thickness 2.2 mm, maximum speed 8500 rev/min
Saw Blade - 5 pc(s) saw plate for reciprocating saws, for chipboard and wood
Sandpaper - ring, suitable for eccentric sanders, diameter: 150mm, grain: 80
Drill Bit - conical shape, for masonry, with a diameter of 7mm and a length of 315mm, SDS Plus mounting, made of Hard metal,
Milling Cutter - grooving, Stalk, in the shape of a cylinder, for wood, material carbide, head diameter 19 mm, shank diameter 6 mm, total length 51 mm, working length 19,6 mm
Drill Bit - conical shape, for masonry, with a diameter of 6mm and a length of 460mm, SDS Plus mounting, made of Steel,
Drill Set - spiral, diameter 3.2 mm, length 65 mm, working length 36 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-Co
Drill Bit - conical shape, for masonry, with a diameter of 12mm and a length of 360mm, SDS Plus mounting, made of Steel,
Saw Blade - 2 pc(s) saw plate for reciprocating saws, for metal, 22,5 × 1,9cm
399,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOCh3985
Bit - cross PZ, size PZ3, standard material S2
Bit Set - single-type, cross-head PH, size PH2, hex 1/4" attachment, material S2, includes 25 bits, in plastic box
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOCh3086
Circular Saw Blade - for wood, number of teeth: 36, blade diameter x bore size: 160×20mm
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOCh2847
399,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC827a
Bit Set - multi-type, flat, cross-head PH, cross-head PZ, torx TH, torx TX, inbus and hex H, size H4, H5, H6, PH1, PH2, PH3, PZ1, PZ2, PZ3, S3, T10, T15, T20, T25, T27, T30, T40, TH10, TH15, TH20, TH25, TH27, TH30, TH40, S4, S5 and S6, hex 1/4" attachment, includes magnetic holder and 32 bits, in plastic toolcase
Drill Bit - conical shape, for metal, with a diameter of 17mm and a length of 184mm, Tapered shank mounting, made of HSS,
Milling Cutter - angled and slotted, Stalk, V-shaped, for wood, material carbide, 60° angle, head diameter 8 mm, shank diameter 11 mm, total length 45 mm, working length 14 mm
Milling Cutter - grooving and forming, Stalk, in the shape of a cylinder, for wood, 2 blades, material carbide, head diameter 15 mm, shank diameter 8 mm, total length 51 mm, working length 19,6 mm
Sanding Pad - Suitable for Bosch angle grinders, plate shape circular, plate fixing with quick-release system, diameter 125 mm
Saw Blade - 5 pc(s) saw plate for reciprocating saws, for metal, 13,2 × 0,2cm
Milling Cutter - Angular, grooving and forming, Stalk, in the shape of a cylinder, for wood, with a bearing, material steel, head diameter 12,7 mm, shank diameter 8 mm, overall length 68 mm, working length 25,4 mm
Chcete doručiť tovar na Slovensko? Prezrite si
Náradie
Für den Versand nach Deutschland, besuchen Sie bitte
Elektrowerkzeuge
Für den Versand nach Österreich, besuchen Sie bitte
Elektrowerkzeuge
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Szerszámok