PWS OXY solution, 3 l
- Reviews 3
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 2
- Alternatives 8
- Accessories and suggested products
PWS OXY solution, 3 l
Swimming pool chemistry PWS OXY solution, 3 l is a liquid preparation designed to increase the oxygen concentration in swimming pool water. It serves as an alternative to conventional oxygen tablets or granules and is easily applied as a dilute solution directly into the water. Thanks to its liquid form, it allows even dispersion of the active substance throughout the entire pool volume. The package has a volume of 3 litres, a weight of 3.8 kg and dimensions of 12 × 19.5 × 19 cm.
Key features of PWS OXY pool chemistry solution, 3 l
- Replaces oxygen tablets and granules
- Suitable for swimming pools and hot tubs
- Can be used in automatic dispensers
- Helps remove organic turbidity in water
- Maintains optimum oxygen concentration for clean and healthy water
Dosing and use:
In the event of undesirable organic haze, apply the liquid concentrated product in diluted form (dilute in a suitable plastic container with drinking or pool water) at a rate of 100-300 ml of the original concentrate per 1 m3 of pool water. To maintain optimal pool water clarity and eliminate organic matter, we recommend applying the product regularly and continuously approximately once every 7 to 14 days at a dose of 100 to 300 ml per 1 m³. The optimum concentration of active oxygen in pool water for effective oxidation of undesirable organic impurities is 10-60 mg/l. Use a suitable pool tester to determine the current concentration of active oxygen. Check the pH value of the pool water regularly and keep it within the recommended range of 7.0-7.6. The product is suitable for automatic dispensers (recommended dosage setting: 10-20 ml per 1m³ per day). The product is suitable for water treatment in whirlpools (daily dose of up to 1 litre per 1 m³ of pool water).
Warning:
In case of higher pool water temperature, the consumption of the product increases. Regular checking of the concentration of active oxygen in the pool water with a suitable tester is absolutely essential.
Never use the product in its original liquid concentrate form together with other pool chemicals or chemicals, especially those based on active chlorine - oxygen release and damage to the respiratory tract and mucous membranes may occur. Residual concentrations of total active chlorine in pool water below 0.2 mg/l should not cause any operational problems when treating pool water with this product. In case of need and necessity of thorough cleaning of the pool water and technological pipelines, it is possible to apply products based on active chlorine and then return to products based on active oxygen.
Safety Alert:
Causes serious eye damage.
Specifications
Features
Shape and type
Meinlinova 395/11, 190 16 Praha, Koloděje, Česká republika, +420 608 463 019
Specifications can be changed without notice. Images are for illustrative purposes only.
