UNI-T Clamp-on Multimeter, UT202A

Multimeter - clamp, AC voltage, DC voltage, resistance and AC current checking, CAT II and CAT III measurement category, battery indication, manual range selection, audible signal and data hold, powered using battery (included in the package), dimensions 210 × 76 × 30 mm (H×W×D), weight 220 g
  831,-
Warranty 24 months Code:  UNImul04
UNI-T Clamp-on Multimeter, UT202A 831,- In stock > 5 pcs at the supplier's
Buy

UNI-T Clamp-on Multimeter, UT202A

Every DIY enthusiast needs a multimeter from time to time. The UNI-T clamp multimeter is designed for measuring current on the clamps using a separate measuring transformer. Other functions can be measured by connecting the cables with test probes. It belongs to the CAT II category, so it is used for low-voltage network circuits, which are typically connected to an electrical socket. It also belongs to the CAT III category, which is suitable for measuring electrical installations in buildings and switchboards. With the UNI-T multimeter, you can measure AC voltage, DC voltage, resistance, and AC current. The device requires one 9V 6F22 battery to operate, which needs to be purchased separately. The dimensions of the UNI-T multimeter are 210 × 76 × 30mm (H × W × D). Its weight is 220g.

UNI-T Clamp Multimeter, UT202A
UNI-T Clamp Multimeter, UT202A

Key Features of the UNI-T Clamp Multimeter, UT202A

  • The UNI-T multimeter is a clamp type
  • Belongs to the CAT II and CAT III categories
  • The UNI-T multimeter can measure AC voltage, DC voltage, resistance and AC current
  • The multimeter requires a 9V 6F22 battery to operate
  • Number of batteries: 1
  • Batteries are not included in the package
  • The multimeter's dimensions are 210 × 76 × 30mm (H × W × D)
  • Weight: 220g

The UNI-T Multimeter Can Do Much More Than Just Measure

The UNI-T multimeter comes with useful features. The battery indication function is very practical, so you can keep track of the charge status. The manual measurement range setting is an invaluable feature. When the task is complete, the UNI-T multimeter will alert you with an audible signal. Therefore, you do not need to watch the display throughout the entire measurement process. If you need to keep the measured data on the display for a longer period, you can use the practical data hold function. This freezes the display and gives you time to evaluate the measured values.

Specifications

Measurement function
AC current, AC voltage, DC voltage, Resistance
Min. DC voltage
200 mV

Measurement function

Measurement function
AC current, AC voltage, DC voltage, Resistance

Direct voltage (DC)

Min. DC voltage
200 mV
Max. DC voltage
600 V
Accuracy ±
0.8 %

Alternating voltage (AC)

Min. AC voltage
2,000 mV
Max. AC voltage
600 V
Accuracy ±
1 %

Alternating current (AC)

Min. AC current
20,000,000 µA
Max. AC current
600 A
Accuracy ±
1.5 %

Electrical resistance

Min. resistance
0.2 ?
Max. resistance
0.02 M?
Accuracy ±
0.8 %

Dimensions

Height
210 mm
Width
76 mm
Depth
30 mm
Weight
220 g

Packaging

Included
Battery
More Specifications

LECHPOL ELECTRONICS LESZEK Spolka komandytowa, ul. Garwolinska 1, 08-400 Mietne POLSKA, [email protected]

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for UNI-T Clamp-on Multimeter, UT202A