Waterstop 5l

Key features of the Waterstop impregnator, 5 l

• The impregnator perfectly takes care of all types of porous mineral materials
• Colorless and water-soluble preparation
• Waterstop is an ideal choice for the treatment of bricks, plasters, roofing, ceramics, fiber cement or concrete
• The impregnator ensures better thermal and sound insulation of the masonry
• Waterstop is suitable for outdoor and indoor use
• The treated material immediately acquires a better appearance
• The product creates a self-cleaning and hydrophobic surface on the treated material
• Thanks to the impregnator, the impurities do not have a chance to reach the depth of the material and are washed away by rain
• In addition, the product minimizes cracking of the material due to frost and de-icing salts
• The surface treated with Waterstop breathes and releases water vapor

Content colour:
clear

Consistency:
liquid

Preparation:
The Waterstop impregnator is diluted 1: 4 with drinking water before use. For less porous substrates up to 1: 9. The working solution must be stored in tightly closed containers.

Workflow:
Waterstop is applied by roller, brush or low pressure spray. The tools used must be alkali-resistant (plastics, steel). One layer is applied to saturate the substrate. On vertical surfaces, apply the impregnator from top to bottom, not running down the walls. On horizontal surfaces, spread the non-soaked Waterstop in dry places. Protect adjacent surfaces from splashes. Remove the impregnator from the affected surfaces with clean water while it is still wet.