Archive - Locks
Choose an alternative in the category
Locks
737
Results
Lock anti-lock brackets for magnetic lock, standard anti-roll bars for both rebated and non-flared doors including anti-noise barrier
Discontinued
Order Code:
RICH242
Lock - tested for 200,000 cycles according to EN 12209:2004, magnetic lock for wooden interior doors, single latch, front: 18mm in matte chrome, backset: 50mm, function - when the door closes, the latch bolt will automatically push into the mortise plate, this is possible with the magnets in both parts of the lock, magnetic, after locking (key, insert, WC handle) the inner mechanism will pull out of reach of the spindle so the handle can be pressed down, but the latch remains in the locked position, suitable for both right and left doors, strike plate must be ordered separately, advantage - quiet operation
Discontinued
Order Code:
RICH241
Lock magnetic, tested for 200,000 cycles according to ČSN EN 12209: 2004, magnetic lock for wooden interior doors, single-barrier bolt, front: 18mm in matt chrome, backset: 50mm, function - when the door opens, the magnets cause these movements in the lock, after locking (key, insert, WC loop) the inner mechanism is pulled out of the nut's reach and the handle can be depressed but the latch remains locked, suitable for both right and left hand doors, counter parts must be ordered separately, quiet operation
Discontinued
Order Code:
RICH240
Lock magnetic, tested for 200,000 cycles according to ČSN EN 12209: 2004, magnetic lock for wooden interior doors, single-barrier bolt, front: 18mm in matt chrome, backset: 50mm, function - when the door opens, the magnets cause these movements in the lock, after locking (key, insert, WC loop) the inner mechanism is pulled out of the nut's reach and the handle can be depressed but the latch remains locked, suitable for both right and left hand doors, counter parts must be ordered separately, quiet operation
Discontinued
Order Code:
RICH239
Mortise Lock - mortise lock, locking latch for knob/handle, function - locking bolt is blocked after the door is closed and cannot be pushed, auxiliary bolt ejects the blocking rod below the main bolt, key can release the latch but not lock it, with gear, nut with spring, pack incl. counter piece and 4 screws
Discontinued
Order Code:
RICH234
Cylinder - security class: RC4, resistant to drilling, bumping, breaking and lockpicking, identification card, dimensions: 35/40, 6 keys included
Discontinued
Order Code:
RICH244
Door Fittings - rosette, with round shape, made of stainless steel, suitable for outdoor use
Discontinued
Order Code:
RICH124
Door Fittings - shield, ball - handle design, PZ lock type, made of aluminium, suitable for outdoor use
Discontinued
Order Code:
RICH106
Door Fittings rosette, certified in safety class RC3 according to ČSN EN 1627: 2012, NBÚ type 2 SS4 = 2, safety steel rosette hardness 60 HRC, excellent protection against mechanical attack, door thickness: 35 - 55 mm, net weight:
Discontinued
Order Code:
RICH118
Door Fittings rosette, certified in safety class RC3 according to ČSN EN 1627: 2012, NBÚ type 2 SS4 = 2, safety steel rosette hardness 60 HRC, excellent protection against mechanical attack, door thickness: 35 - 55 mm, net weight:
Discontinued
Order Code:
RICH117
Door Fittings rosette, certified in safety class RC3 according to ČSN EN 1627: 2012, NBÚ type 2 SS4 = 2, safety steel rosette hardness 60 HRC, excellent protection against mechanical attack, door thickness: 35 - 55 mm, net weight:
Discontinued
Order Code:
RICH116
Cylinder - safety class RC 3, patented key protection No. 303 220, double-sided version with a knob (small size - matt nickel), provides high protection, non-destructive with specially shaped tumblers and additional locking elements, can integrate with other FAB 200RS products for single key control, one-row system, 5 vertically oriented buckles, Euro-profile by DIN standards, matt nickel finish, supplied with 3 keys and an identification card, length of cylindrical insert: 35+45mm
Discontinued
Order Code:
ASAB230
Cylinder - certified in accordance with ČSN EN 1627: 2012 in safety class RC 3, meet the requirements of NBU "locking system type 2" according to Act 412/2005 Coll., patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, double-sided version with knob (black plastic), non-destructive bumping protection with specially shaped tumblers and additional locking elements, possibility of uniting on a common seal (SU marking) with products FAB 200RS, one-row system, 5 vertical stacks, Europrofil according to DIN , surface finish - matt nickel (Nm), standard supplied with 3 keys and identification card, length of cylindrical insert 29 + 35mm
Discontinued
Order Code:
ASAB229
Cylinder Certified according to ČSN EN 1627: 2012 in safety class RC 3, meet the requirements of the NBU "locking system type 2" according to Act 412/2005 Coll., Patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, double-sided version with knob (Black plastic), non-destructive bumping protection against bumping with specially shaped pins and additional locking elements, possibility of uniting on a common seal (SU marking) with products FAB 200RS, single row system, 5 vertical stackers, Europrofil according to DIN , Surface finish - polished brass, standard supplied with 3 keys and identification card, length of cylindrical insert 29 + 35 mm
Discontinued
Order Code:
ASAB228
Cylinder - certified in accordance with EN 1627:2012 in safety class RC 3, patented key protection - patent No. 303 220 and utility model CZ 23209 U1, one-sided version, protection from picking, non-destructive bumping method with specially shaped tumblers and additional locking elements, possibility of uniting to a common key (SU marking) with FAB 200RS products, single row system, 5 vertically oriented tumbler pins, DIN profile according to the Europrofile standard, for FAB 201, surface finish - matte nickel, supplied with 3 keys and an identification card as standard, length of cylindrical insert 29+10mm
Discontinued
Order Code:
ASAB227
Cylinder Certified according to ČSN EN 1627: 2012 in safety class RC 3, meet the requirements of the NBU "locking system type 2" according to Act 412/2005 Coll., Patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, variant one- Anti-fouling, non-destructive bumping method with specially shaped tumblers and additional locking elements, possibility to be joined to a common seal (SU designation) with FAB 200RS, single-row system, 5 vertical screws, Europrofil according to DIN standard, polished brass , Standard with 3 keys and identification card, length of cylindrical insert 29 + 10 mm
Discontinued
Order Code:
ASAB226
Cylinder - certified according to ČSN EN 1627: 2012 in safety class RC 3, meets the requirements of the NBU "type 2 locking system" according to Act 412/2005 Coll., Patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, Anti-fouling, non-destructive bumping method with specially shaped tumblers and additional locking elements, doublesided, possibility of unification on a common seal (SU designation) with FAB 200RS products, single row system, 5 vertical rods, DIN standard Europrofile, (Designation Nm), nickel surface, supplied with 3 keys and identification card, cylindrical insert length 50+50mm
Discontinued
Order Code:
ASAB225
Cylinder - certified according to ČSN EN 1627:2012 in safety class RC 3, patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, double-sided, protection from prying the lock open, non-destructive bumping protection with specially shaped pin tumblers and additional locking elements, possibility of uniting on a common seal (SU designation) with products FAB 200RS, single-row system, 5 vertical pin tumblers, Europrofil according to DIN standard, (designation Nm), supplied with 3 keys and an identification card as standard, cylindrical insert length: 45 + 55mm
Discontinued
Order Code:
ASAB224
Cylinder - certified according to ČSN EN 1627: 2012 in safety class RC 3, meets the requirements of the NBU "locking system type 2" according to Act 412/2005 Coll., patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, non-destructive bumping method with specially shaped pins and additional locking elements, compatible with a common seal (SU marking) with products FAB 200RS, one-row system, 5 vertically oriented buckles, Europrofil according to DIN standard, (designation Nm), standard supplied with 3 keys and identification card, cylindrical insert length 45+50mm
Discontinued
Order Code:
ASAB223
Cylinder - certified in accordance with ČSN EN 1627: 2012 in safety class RC 3, meets the requirements of the NBU "locking system type 2"according to Act 412/2005 Coll., patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, anti-fouling, non-destructive bumping method with specially shaped tumblers and additional locking elements, possible to be joined to a common seal (SU designation) with FAB 200RS products, single row system, 5 vertical stacks, Europrofil according to DIN standard, (designation Nm), standard supplied with 3 keys and identification card, cylindrical insert length 45 + 45mm
Discontinued
Order Code:
ASAB222
Cylinder - Certified according to safety class RC 3, meets the requirements of the NBU locking system type, Patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, Anti-fouling, non-destructive bumping method with specially shaped tumblers and additional locking elements, possibility of uniting on a common seal (SU marking) with products FAB 200RS, single-row system, 5 vertical screws, Europrofil according to DIN standard, (Designation Nm), standard supplied with 3 keys and identification card, cylindrical insert length 40 + 60mm
Discontinued
Order Code:
ASAB221
Cylinder certified according to ČSN EN 1627: 2012 in safety class RC 3, meet the requirements of the NBU "locking system type 2" according to Act 412/2005 Coll., patent protection of the key - patent No. 303 220 and utility model CZ 23209 U1, anti-fouling, non-destructive bumping method with specially shaped pins and additional locking elements, possibility of uniting on a common seal (SU marking) with products FAB 200RS, one-row system, 5 vertically oriented pins, Europrofil according to DIN standard, (designation Nm), standard supplied with 3 keys and identification card, cylindrical insert length 40 + 55 mm
Discontinued
Order Code:
ASAB220
Cylinder - provides high protection, non-destructive with specially shaped tumblers and additional locking elements, can integrate with other FAB 200RS products for single key control, one-row system, 5 vertically oriented buckles, supplied with 3 keys and an identification card, length of cylindrical insert: 40+50mm
Discontinued
Order Code:
ASAB219
Cylinder - Certified according to ČSN EN 1627: 2012 in safety class RC 3, meets the requirements of the NBU "locking system type 2" Dual bumping method with specially shaped tumblers and additional locking elements, possibility of unification on a common seal (SU marking) with products FAB 200RS, single-row system, 5 vertically oriented buckles, Europrofil according to DIN standard, (Designation Nm), standard supplied with 3 keys and identification card, cylindrical insert length 40 + 45mm
Discontinued
Order Code:
ASAB218