Milian PRO 3 with three sensor pads
Installment calculator
4,9%
interest
from 103,- monthly
Milian PRO 3 with three sensor pads
Milian Pro 3 is designed to monitor the baby's movement, breathing and sleep. It works on the principle of sliding plates that can be universally inserted under all types of mattresses. 4 large scanning plates measuring 30 × 50 cm (3 included) can be connected to the instrument. If all three sensors are used, the Milian PRO 3 can monitor the entire surface of the 70 × 140 cm cot. The central unit of the device can be attached with Velcro and can be easily transported. The monitor is also equipped with an internal memory that remembers the last 12 minutes. In the case of twins, this time is reduced to 6 minutes. Milian PRO 3 uses 2 pencil batteries as its power supply. Night mode with reduced brightness contributes to lower product consumption. Intelligent battery monitoring then ensures that the device only reminds you when the child is already awake. The monitor is very easy to operate with just one button.
Key features of the Milian Pro 3 breath monitor
- Milian Pro 3 is designed to monitor baby's movement, breathing and sleep
- When a breathing failure is detected for more than 12 seconds, an audible alert for the child is triggered
- Triggers an alarm after 18 seconds without movement
- It will also alert you if the baby's breathing rate is less than 10 breaths per minute or if the baby's breathing is weaker than 2.5 minutes
- It works on the principle of sensing plates inserted under the mattress
- The boards can be universally tucked under any type of mattress
- You can connect 4 large scanning plates of 30 × 50 cm to the device
- In the package you will find 3 plates
- Milian Pro 3 can also be used for twins
- The internal memory of the monitor remembers the last 12 minutes (6 minutes in the case of twins)
- Can display the force of motion graphically or numerically
- By setting a custom detection level, you can filter out disturbing environmental movements
- Uses 2 pencil batteries as its power source
- Has a night mode with reduced brightness
- Operated with only one button
The monitor also includes advanced security features
Milian Pro 3 has a wide range of safety equipment. When breathing failure is detected for more than 12 seconds, an audible alert will sound. These are 3 short sounds that try to build up the child to move. After 18 seconds without movement, it then triggers an alarm. It will also alert you if the baby's breathing rate is less than 10 breaths per minute or if the baby has been breathing less than 2.5 minutes. It can also display the force of the movement, in real time graphically or by a numerical value updated every 3 seconds. By setting a custom detection level, you can also filter out distracting environmental movements that could lead to distorted readings and potential danger to the child.
Specifications
Type
Age
Power supply
Battery
Features
Sensor/pad dimensions
Specifications can be changed without notice. Images are for illustrative purposes only.
