Dobrý den chtěl bych se zeptat jestli mohu ovládat rgb podsvícení nebo ne?
Montech AIR 100 LITE White
PC Case - mATX (Micro ATX) and mITX (Mini ITX), 2× 2,5" slot(s), 2× 2.5"/3.5" slot(s), USB 2.0, USB 3.2 Gen 1, 3.5mm jack (headphones) and 3.5mm jack (microphone), 2×120mm, max. heat sink height: 161mm, max. graphics card length: 330mm, without power supply, side panel made of tempered glass
Show full description
Buy with code
ALZADNY10
1,016,-
Amazing Deal
1,129,-
Save 170,-
Shop faster with pickup at AlzaBox or in-store.
Warranty 24 months
Code:
MONa100a2
Producer's Website:
Montech AIR 100 LITE White
1,129,-
In stock > 5 pcs
Buy
Montech AIR 100 LITE White
The Montech AIR 100 LITE computer case in white is the perfect foundation for building compact gaming stations and work PCs in the Mini Tower format. The steel construction supports Micro ATX and Mini ITX motherboards, with the main emphasis on intense airflow through the fine-mesh front panel. The internal architecture provides plenty of space for installing long graphics cards and tower CPU coolers, meeting the demands of modern hardware. The tempered glass side panel on rotating hinges allows for easy visual inspection of components and quick access for maintenance or upgrades without needing a screwdriver.
Mini Tower
Case size
161mm
Max. CPU cooler height
330mm
Maximum graphics card length
2×
Number of installed fans
2×
Total number of fan positions
Key features of the Montech AIR 100 LITE computer case
- Supports mATX and mITX motherboards
- Includes two pre-installed fans
- Tempered glass side panel on rotating hinges
- Internal space accommodates long graphics cards
- Top panel offers USB 3.2 Gen 1 and USB 2.0 connectors
- Dust filters protect components from dirt
- Construction supports water cooling installation
Minimalist design with a fine mesh grille
The front panel is made of a fine mesh that acts as a dust filter while allowing for massive airflow. The steel construction gives the whole case the necessary strength and stability. The front grille acts as a barrier against dirt but lets cool air flow directly to the heated components. Users can easily remove the front panel for cleaning without any tools.
Montech AIR 100 LITE tempered glass side panel
The left side is enclosed by a tempered glass panel, providing an unobstructed view of the installed hardware. The side panel uses hinges for easy opening and instant access to the computer's internal parts. The glass has no drilled holes, which significantly increases its resistance to cracking. The swing-out mechanism is ideal for anyone who frequently changes components or cleans the inside of their computer.
Pre-installed fans for effective cooling
The manufacturer has fitted the case with two 120mm fans in a push-pull configuration to immediately dissipate accumulated heat. One fan draws in fresh air from the front, and the other exhausts it out the back. This solution ensures stable temperatures right out of the box. The fans connect via a 3-pin connector, and their speed can be adjusted according to the current system load.
Water cooling support in the Montech case
The space inside can accommodate water cooling radiators up to 280mm at the front, which is sufficient even for high-performance processors. The top position offers space for a 240mm heat exchanger if the user prefers to exhaust heat through the top of the case. The chassis supports water cooling radiators sized to match the standards of compact builds. The cooling flexibility enables future upgrades to more powerful solutions without needing to replace the case.
Space for powerful components
The internal layout accepts graphics cards up to 330mm in length, which includes most modern gaming accelerators on the market. The processor cooler can reach a height of 161mm, so even robust tower coolers will fit inside. The case therefore accepts graphics cards with a length sufficient even for high-end mATX builds. PC builders don't have to compromise on performance due to the case's smaller dimensions.
Drive bays in the Montech AIR 100 LITE
Users have slots available to install two 3.5" hard drives or 2.5" SSDs in a combined cage. Two additional positions are dedicated exclusively to 2.5" drives, which are mounted on the back of the motherboard tray. The ATX format power supply is placed in the bottom tunnel, which separates its heat from the rest of the system. This layout contributes to better organisation and airflow throughout the entire build.
Connectivity and cable management
The top panel includes two USB 3.0 ports and one USB 2.0 port for quick connection of external drives or peripherals. Pre-installed Velcro straps and strategically placed grommets make it easy to route cables behind the motherboard. The panel offers two ports and one connector for plugging in headphones and a microphone via separate 3.5mm jacks. Clean cable management not only improves the look but also the airflow inside the case.
Dust protection on the Montech AIR 100 LITE
In addition to the front grille, the internal space is protected by a magnetic filter on top and a slide-out filter under the power supply. These elements capture fine dust particles and prevent them from settling on fan blades or cooler fins. The filter system protects the internal space and components effectively, thereby extending their lifespan. Maintaining and cleaning the filters takes minimal time thanks to their easy removal.
Motherboard formats
- mATX (Micro ATX)
- mITX (Mini ITX)
Fans
- Front fan size: 120mm
- Rear fan size: 120mm
- Number of rear fans: 1× 120mm
- Number of front fans: 3× 120mm
Ports
- USB 2.0
- USB 3.2 Gen 1
- 3.5mm jack (headphones)
- 3.5mm jack (microphone)
Specifications
Location
Colour
Motherboard form factor
Number of internal 2.5" slots
Usage and size
Location
Colour
Colour
Internal structure
Motherboard form factor
Number of internal 2.5" slots
Number of internal 2.5"/3.5" slots
Max. processor heat sink height
Max. graphics card length
External structure
3.5mm jack (headphones), 3.5mm jack (microphone), USB 2.0, USB 3.2 Gen 1
Sidewalls
Side panel material
Additional equipment
PSU
Power supply
Supported PSU format
Cooling system
Front fan size
Rear fan size
Number of fan positions
Number of mounted ventilators
Supported radiator size on top
Supported radiator size from the front
Backlight
Backlight colour
Material
Wardrobe material
More Specifications
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
