Pasivní chladič Thermalright HR-05-SLI
Pasivní chladič Thermalright HR-05-SLI
Discontinued
Pasivní chladič Thermalright HR-05-SLI
Quite noiseless passive radiator designed for cooling čipsetu on the motherboard.Special shape allows the use of the systems to support SLi technology or CrossFire.The size of the copper base is 30 x 30 mm.The radiator is very light and ensures easy installation.The radiator has HeatPipe technology and can be placed on him and active fan with maximum dimensions of 70 x 70 x 15 mm.
HeatPipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention offers the technologies HeatPipe higher efficiency of transmission of heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Fan:
A maximum of 70 x 70 x 15 mm (not included)
Dimensions base:
30 x 30 mm
Dimensions:
78 x 63 x 105 mm
Weight:
124 g
HeatPipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention offers the technologies HeatPipe higher efficiency of transmission of heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Fan:
A maximum of 70 x 70 x 15 mm (not included)
Dimensions base:
30 x 30 mm
Dimensions:
78 x 63 x 105 mm
Weight:
124 g
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
