Philips 9000 Series Air Performer 4in1 AMF970/10
Installment calculator
4,9%
interest
from 319,- monthly
Philips 9000 Series Air Performer 4in1 AMF970/10
- or almost new.
Philips 9000 Series Air Performer 4-in-1 AMF970/10
Air purifier, fan, heater and humidifier with a connection to the Air+ app
This multifunctional device is a unique combination of a purifier, humidifier, heater and fan. It uses smart AeraSense sensors that monitor the air in the room in real time and automatically adjust the device's operation. Three-layer filtration effectively removes airborne allergens. NanoCloud technology hygienically humidifies the air from 30 to 70%. In heating mode, the device distributes warm air in just 3 seconds after being switched on. Night mode guarantees extra-quiet operation. The mobile app makes it easy to control.
4-in-1 air purifier: purifies, humidifies, heats and cools
Thoroughly purifies rooms up to 48m²
3-layer HEPA filter captures 99.97% of ultrafine particles
All-in-one device
This unique 4-in-1 device can be used all year round. It purifies and humidifies the air, heats and cools. Just select the mode that will make the atmosphere in your home more pleasant right now.
Thoroughly purifies rooms up to 48m²
The Philips 9000 Series Air Performer 4-in-1 AMF970/10 achieves a CADR of 185m³/h*. This means that it purifies the air in a 20m² room in just 16 minutes.** It purifies the air in all modes. It automatically detects the air quality and adjusts its performance accordingly.
A strong stream of air for a refreshing cool down
If you want to cool down quickly, activate the fan mode. The Philips 9000 Series Air Performer 4-in-1 AMF970/10 can create a powerful airflow of up to 1470m³/h. Thanks to its bladeless design, the airflow is steady and consistent. You have 10 speeds to choose from.
In heating mode, the Philips 9000 Series Air Performer provides pleasant warmth
The device starts heating the room in just 3 seconds after activating the heating. It has an adjustable power output of up to 2200W. You can choose from 10 heating speeds. You can set the target temperature between 1 and 37°C.***
Hygienically humidifies thanks to NanoCloud technology
The Philips 9000 Series Air Performer 4-in-1 humidifies the air at a rate of up to 380ml/h. You can choose a target humidity level of 30–70%. Thanks to NanoCloud technology, it releases an ultra-fine mist that spreads up to 99.9% fewer bacteria compared to standard ultrasonic humidifiers.**** The device humidifies in all modes.
Night mode with ultra-quiet operation
You can place the device in your bedroom or a child's room without any worries. In sleep mode, it is quieter than a whisper, reaching just 21dB(A).***** In this mode, the lights also switch off automatically. Nothing will disturb your rest.
3-layer HEPA filter captures 99.97% of ultrafine particles******
The Philips 9000 Series Air Performer 4-in-1 AMF970/10 is equipped with a three-layer filtration system, which consists of a pre-filter, a HEPA NanoProtect filter, and an active carbon layer.
Removes allergens, bacteria, viruses, odours and harmful gases
Air purification runs automatically in any of the appliance's modes. The Philips 9000 Series effectively removes 99.99% of allergens, 99.9% of airborne viruses and bacteria while reducing the amount of harmful gases and odours. *******
Intelligently monitors air quality and adjusts its performance
The appliance uses intelligent AeraSense sensors that monitor current air values in real time: the level of pollution, its humidity and temperature. It then automatically adjusts its operation to achieve the desired results.
Control the Philips 9000 via remote control or the Air+ app
Connect the Philips 9000 Series Air Performer 4-in-1 AMF970/10 to the smart Air+ mobile app and get the most out of it! Control the appliance remotely and change modes or schedule as needed. You can monitor indoor and outdoor air quality in real time.
Wide airflow up to 350°
The unique design of the appliance allows it to create a really wide airflow and permeate the entire room in an instant. The appliance oscillates 350° for the best results.
Easy maintenance and cleaning of the air purifier
When the filter is worn out, it needs to be replaced. The appliance will prompt you to do so. The wear status of the filter can also be monitored in the mobile app. The water tank is easy to fill, just use regular tap water.
Technical Specifications for the Philips 9000 Series Air Performer 4-in-1 AMF970/10 Air Purifier
- Product type: 4-in-1 air purifier, fan, heater and humidifier
- Technology: HEPA NanoProtect, AeraSense sensors
- Colour: Charcoal Grey + Ash Gold
- Internet connection: Yes
- Wi-Fi range: 2.4GHz
- Voice control: Yes
- Water tank capacity: 2.6L
- Maximum power: 2200W (heating)
- Air quality sensors: PM2.5, gas, allergens, temperature, humidity
- Minimum noise level: 21dB(A)
- Max. noise level: 48dB(A)
- CADR (Clean Air Delivery Rate) (particles, GB/T): 185m³/h (GB/T)
- Filter layers: HEPA filter, activated carbon, pre-filter
- Particle filtration: 99.97% at 0.003 microns
- Humidification rate: 380ml/h
- Max. room size: 48m²
- Fan airflow: 1470m³/h
- Remote control: Yes
- Oscillation: Up to 350°
- Cable length: 1.8m
- Scheduler: Yes (in app)
- Auto mode: Yes
- Sleep mode: Yes
- Speed settings: Yes (10 levels)
*CADR is tested by a certified independent laboratory in accordance with GB/T 18801-2022.
** Calculated according to NRCC-54013
*** The temperature displayed may differ from the room temperature; it reflects the temperature in the immediate vicinity of the device.
**** Compared to standard ultrasonic humidifiers that do not contain additional technology to limit the spread of bacteria, based on independent laboratory tests.
***** Acoustic pressure, IEC 60704.
****** From the air passing through the filter, tested according to DIN 71460 with NaCl aerosol of 0.003 µm and 0.3 µm, iUTA institute
******* From the air passing through the filter, tested for allergens (house dust mites, birch pollen and cat allergens) according to SOP 350.003 of the Austrian OFI institute
Microorganism reduction test performed by an external laboratory with influenza virus (H1N1) in a 30m³ test chamber, in turbo mode for 1 hour
Tested according to GB21551.3-2010 with Streptococcus Albus, 30m³ chamber, for 1 hour, turbo mode, third party test
External laboratory test GMT according to GB/T 18801-2022 with TVOC, toluene and NO₂, 30m³ room, turbo mode for 1 hour.
Specifications
Features
Functions
Filters
Dimensions and weight
Philips Consumer Lifestyle B.V., Tussendiepen 4 9206 AD Drachten Netherlands, www.philips.com/support
Pernerova 702/39, 186 00 Prague 8, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
