Dobry den, zvladne odfiltrovat PFAS?

The AUT3268/10 under-sink water filtration system takes care of advanced filtration with reverse osmosis. The four-stage reverse osmosis filtration system filters particles down to 0.0001 micron in size. You no longer have to buy bottled water for drinking or cooking. Get top-quality clean water right in your own home. Optimum filtration performance will be ensured thanks to automatic membrane flushing, making filter maintenance completely effortless. It also includes a mineral filter that enriches the water with minerals and improves its taste.
Four-stage reverse osmosis filtration
Built-in UV-C in 10.6 litre tank
Fast flow rate 2.1 l/min
The Philips AUT3268/10 filter system ensures a long-lasting and efficient performance in filtering pollutants from tap water. Four-stage filtration reduces large particles, absorbs chlorine, pesticides, chemicals and removes solids dissolved in the water. It also includes a mineralization filter that enriches the water with minerals and improves its taste.

The Philips AUT3268/10 under-sink filter effectively removes contaminants down to 0.0001 microns in size using reverse osmosis particle filtration.

The filtration system uses a mineralization filter that enriches the water with minerals and balances the pH of the water.

After just a few seconds, you can enjoy healthier and fresh water enriched with minerals. The water flow rate of the underdrain filtration system reaches 2 l/min.

The Philips AUT3268/10 is easy to install thanks to minimal pipes and connections. Subsequent filter changes are easy and hygienic thanks to the QuickTwist system.

The Philips AUT3268/10 undermount filter system has a high durability and the filters in it will last you a long time.
Reverse osmosis filter: filter capacity up to 11,000 l and lasts 24-36 months
PP/CB filter: filtration capacity up to 5500 l and up to 12 months
Mineralization filter: filtration capacity up to 1850 l or up to 12 months

Forget about buying expensive and heavy bottled water. The Philips AUT3268/10 filter system creates high quality, clean water right in your home. Not only will you save money, but you will also reduce the number of single-use plastic bottles you buy.

The Philips AUT3268/10 filter system has automatic membrane flushing. This automatically keeps the filtering performance of the reverse osmosis membrane in top condition, so you do not have to intervene.

Flow rate (l/min)
2 l/min
Water tank capacity
10,6 l
Product dimensions
378 × 130 × 425 mm
Water outflow ratio
1:2
Inlet water temperature
5-38 °C
Tank dimensions
Diameter: 237 × 370 mm
Water supply pressure
0,3-0,7 MPa
Filter material
Carbon block, mineralization filter, reverse osmosis membrane (283.90 l/day) and polypropylene
Filter lifetime
RO filter: 24-36 months
Mineralizing + PP + CB filter: 6-12 months
Filter sensitivity
up to 0.0001 micron
Reduction of turbidity
Yes
Reduction of bacteria
up to 99.99%
Reduction of viruses
up to 99.99%
Chlorine reduction
up to 99%
Reduction of pesticides
up to 99%
Reduction of water hardness
Yes
Reduction of heavy metals
up to 99%
Reducing the amount of chemicals
up to 99%
Reduction of volatile organic compounds
up to 99%
Reduction of deposits
Yes
Other specifications
Philips Consumer Lifestyle B.V., Tussendiepen 4 9206 AD Drachten Netherlands, www.philips.com/support
Pernerova 702/39, 186 00 Prague 8, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.