
The Seasonic Core GX-750 computer power supply in black powers modern gaming and work setups with 750W of power. This ATX 3.1 PSU ensures reliable operation with components that require a high instantaneous power draw, such as NVIDIA RTX 40 series and future generation graphics cards. Thanks to its 80 PLUS Gold certification, it delivers power with high efficiency and minimal heat loss. The fully modular system with black braided cables helps with tidy cable management and enhances the aesthetic of clean builds with a glass side panel.
When choosing a suitable PC power supply, the key parameter, besides the format, is its power output. This indicates the maximum number of Watts the PSU can continuously supply to the computer's components. It's a good idea to use a web calculator to determine the optimal power output based on your chosen components.
Compliance with the ATX 3.1 specification means the power supply is fully prepared for the hardware demands of current and future components. The ATX 3.1 specification defines stricter voltage tolerances and the ability to handle the extreme power spikes required by graphics cards with a PCIe 5.1 interface. This standard addresses short but high energy surges, preventing system instability and unexpected restarts under maximum load.
The power supply includes a native 16-pin 12V-2x6 cable for directly powering PCIe 5.1 standard graphics cards. This connector delivers up to 600W of power to the card through a single cable, eliminating the need for adapters. The direct connection simplifies installation, reduces the number of connections as potential points of failure, and frees up space for better airflow in the case.
To maintain compatibility with older graphics cards, the package includes a special adapter. This adapter converts the 12V-2x6 connector to two standard 8-pin PCIe connectors. This means the power supply can also power graphics cards that require traditional power connectors without any issues. This solution provides flexibility when gradually upgrading a computer build, as you don't have to change the power supply and graphics card at the same time.
A fully modular cabling system gives you control over which cables you use in your build. You only connect the necessary ones, which significantly simplifies cable routing and management of the internal space. Reducing excess cables also clears the way for airflow, contributing to more efficient component cooling.
A 120mm fan takes care of cooling the internal components. The fan uses a fluid dynamic bearing (HDB), which minimises friction and operational noise thanks to fluid lubrication. This type of bearing provides longer operational reliability and a stable acoustic profile throughout its lifespan compared to standard sleeve bearings.
The power supply uses Smart and Silent Fan Control (S2FC) technology. This system intelligently regulates the fan speed depending on the current load and temperature. At low loads, it keeps the fan in a passive mode with zero RPM, achieving completely silent operation. The fan only activates once a defined load threshold is exceeded, when cooling is actually needed.
The internal PCB layout utilises OptiSink technology. This solution optimises the placement of heat-generating components, such as MOSFET transistors and heatsinks. It improves the natural dissipation of thermal energy from key components and limits the formation of local hot spots. More effective cooling increases the reliability and extends the lifespan of the entire power supply.
The power supply protects connected components with a complete set of electrical protections. This set includes over-voltage, under-voltage, over-current, overload, short-circuit, and over-temperature protection. These circuits continuously monitor operating values and, in the event of an anomaly, immediately disconnect the power to prevent hardware damage.
The 80 PLUS Gold certification confirms the power supply's high energy efficiency. At 50% load, it operates at 90% efficiency, which means only 10% of the energy is converted into waste heat. Lower heat losses reduce cooling demands, leading to quieter operation, and the efficient performance also results in lower electricity consumption.
The 80 Plus certification was created to objectively assess the efficiency of PC power supplies. This provides users with a simple and clear comparison of different models. In the European market (where 230V is used), there are six levels of 80 Plus certification with set requirements for PC power supplies. Higher energy efficiency primarily means lower energy consumption.
| PC power supply load | Efficiency at 20% load | Efficiency at 50% load | Efficiency at 100% load |
|---|---|---|---|
| 80 PLUS | 82% | 85% | 82% |
| 80 PLUS Bronze | 85% | 88% | 85% |
| 80 PLUS Silver | 87% | 90% | 87% |
| 80 PLUS Gold | 90% | 92% | 89% |
| 80 PLUS Platinum | 92% | 94% | 90% |
| 80 PLUS Titanium | 94% | 96% | 94% |
Sea Sonic Europe BV, Rietveld 7, 5258 ED Berlicum, Netherlands [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.