Sennheiser IE 600
Installment calculator
4,9%
interest
from 425,- monthly
Sennheiser IE 600
The Sennheiser IE 600 audiophile in-ear headphones use a single 7mm TrueResponse dynamic driver. The acoustic tuning is focused on neutral reproduction with fast and accurate bass, while the D2CA dual resonance chamber technology limits resonances that affect reproduction. The headphone housings are made of AMLOY-ZR01 amorphous metal using 3D printing and are then finished by hand. The detachable cables are reinforced with para-aramid fibres and connect to the headphones via gold-plated Fidelity (+) MMCX connectors.
Closed-back
Design
3.5mm Jack
Connection type
Integrated
Microphone design
4–46,000Hz
Frequency range
Key Features of the Sennheiser IE 600 Headphones
- The Sennheiser IE 600 headphones have a 7mm TrueResponse dynamic driver
- Frequency range 4Hz to 46.5kHz
- Neutral acoustic tuning with fast and accurate bass response
- D2CA technology with two resonance chambers
- THD 0.06% at 1kHz and 94dB sound pressure
- Housings made of AMLOY-ZR01 amorphous metal using 3D printing
- Gold-plated Fidelity (+) MMCX connectors for detachable cables
- Para-aramid reinforced cables with 3.5mm and 4.4mm connectors
- Adjustable ear hooks to customise the fit of the headphones
- Silicone and foam ear tips in three sizes
TrueResponse and Neutral Acoustic Tuning
The Sennheiser IE 600 uses a single 7mm TrueResponse dynamic driver that provides a frequency response from 4Hz to 46.5kHz. The internal acoustic space in the nozzle has been modified to achieve a natural sound. D2CA technology uses two resonance chambers to limit unwanted resonances. The total harmonic distortion is 0.06% at 1kHz and 94dB.
AMLOY-ZR01 and Detachable Cables
The IE 600 housings are made of AMLOY-ZR01 amorphous metal, a material also used for components in the aerospace and medical industries. The housings are manufactured in Germany using 3D printing and include both automated and manual production steps. Cables with 3.5mm and 4.4mm terminations are available. The ergonomic design is complemented by adjustable ear hooks and both silicone and foam ear tips in three sizes.
Technical Specifications
- Drivers: 7mm dynamic TrueResponse
- Design: In-ear
- Impedance: 18 Ohm
- Total Harmonic Distortion (THD): 0.06% at 1kHz / 94dB
- Acoustic technology: D2CA, two resonance chambers
- Housing material: AMLOY-ZR01 amorphous metal
- Headphone connectors: Gold-plated Fidelity (+) MMCX
- Cable: Detachable, reinforced with para-aramid fibres
- Cable connectors: 3.5mm and 4.4mm
- Adjustable ear hooks
Package Contents
- Sennheiser IE 600 headphones
- Para-aramid cable with 3.5mm connector
- Para-aramid cable with 4.4mm connector
- Silicone ear tips in 3 sizes
- Foam ear tips in 3 sizes
- Carrying case
Impedance
This figure indicates how much power the headphones require. Headphones with a lower impedance (e.g., 32Ω) are ideal for mobiles and laptops. A higher impedance (e.g., 80Ω and above) is better suited for Hi-Fi players and amplifiers.
Frequency Range
Indicates what sounds the headphones can reproduce. The normal range is 20Hz–20kHz, which corresponds to what the human ear can hear. Lower Hz = deeper bass, higher kHz = more detailed treble.Specifications
Type of headphones
Connection
Features and functions
Headphone characteristics
Microphone characteristics
Colour
Weight
Number of headphones
Packaging
IPE MUSIC 20, rue Clément Ader - ZA Les Gloriets Les Sables d'Olonne - France (+33) 2 51 32 20 35 [email protected], Jean-Philippe Bora
Specifications can be changed without notice. Images are for illustrative purposes only.
