Dobrý deň. V popise je pripojenie 230 a 400V. V navodoch je všade písané iba 230V tak ako to teda je? ďakujem

This high-quality built-in Siemens induction hob is an outstanding addition to every modern kitchen. It comes equipped with innovative features that will greatly speed up and simplify the preparation of food on its pair of cooking zones that provides just enough cooking space. The appliance can also be paired with other Siemens Domino products. It features the special powerMove Plus function, which enables intuitive control of heating levels by simply moving the cooking vessel.
This cooktop boasts a number of useful features, such as a timer, a Restart function, the option to set the maximum wattage of the board, automatic pot size detection, a power consumption indicator, and a two-stage residual heat indicator for each cooking zone. The cooktop is also designed to be easy to clean, even during use. If a quick wipe is required while cooking, the control panel can be locked for 20 seconds.
Additional information:
Installation dimensions:
270 x 490mm
Minimum thickness of worktop: 30 mm
Power cord:
1.1m
Power consumption:
3700W
Zone 1 power:
2.2kW
Zone 2 power:
2.2kW
What is the difference between flexi, combi zone, and round inductors?
Round zones have a fixed size. A combi zone bridges two separate zones into one larger area. A flexi zone, on the other hand, adapts to the shape and size of the cookware anywhere on the surface.
Can I connect the hob to 400V?
Yes, most induction hobs can be connected to 400V (two phases), which is actually recommended for reaching full power.
Why can't I connect a hob with a power input of 4.6 kW to two phases?
A 4.6 kW power input is designed to run on a single, stronger phase. Splitting the load across two phases usually requires a higher total power rating, around 7 kW.
On your website, you state Voltage 220-240 V, can the hob be connected to a multi-phase connection?
Yes, the 220-240V figure refers to the voltage per phase. The hob can typically be connected to two phases (400V) as well.
Which hobs are designed for flush installation?
These are frameless models with polished edges, listed in the range as suitable for flush-mount installation.
The hob is noisy, it clicks loudly.
The clicking comes from switching relays or the power management function. It's a normal operating characteristic of induction technology, not a fault.
Is it possible to turn off the sound signals on the hob?
Yes, on Bosch and Siemens models this can be done in the "Basic Settings" menu (C2). Confirmation tones can be muted, but warning signals stay active regardless.
What is the smallest diameter of cookware that will work on an induction hob?
The minimum diameter depends on the size of the zone, and typically falls somewhere between 9 and 12 cm.
For questions about Siemens large home appliances, you can find all the useful information here.
Siemens Aktiengesellschaft, Werner-von-Siemens-Straße 1, 80333 München, Spolková republika Německo, [email protected], +49 89 3803-5491
Specifications can be changed without notice. Images are for illustrative purposes only.