Jurek Ulli 2
Installment calculator
4,9%
interest
from 170,- monthly
Jurek Ulli 2
The Jurek Ulli 2 is an ultralight, double-skin tent for 2 people from the ULTRALITE series, designed for year-round use. The single-pole structure is complemented by a short transverse arch, which expands the upper part of the bedroom. Two entrances facilitate easy access and a large vestibule provides a sheltered space for rucksacks, footwear, and other equipment.
2
Capacity
6,000mm / 15,000mm
Water column flysheet / groundsheet
225 × 240 × 95cm
Tent dimensions (H × W × D)
Double-skin
Number of skins
2.2kg
Weight
Key Features of the Jurek Ulli 2 Tent
- The single-pole design with a transverse arch offers more space in the upper part of the bedroom
- Only one pole crossing point makes the structure easier to assemble
- Two entrances allow access from both sides of the tent
- A large vestibule serves for storing rucksacks, footwear, and other equipment
- Flysheet made of lightweight polyamide ripstop fabric with PU and silicone treatment
- Quick fastening of the flysheet corners using buckles
- Covered ventilation protected from direct rain penetration
Lightweight Materials and Duralumin Structure
The main pole and transverse reinforcement are made of duralumin SM 7001-T6. The flysheet consists of a lightweight polyamide ripstop fabric with a special PU coating and silicone treatment. The groundsheet uses a polyamide fabric with a PU coating and an outer silicone layer.
Covered Ventilation of the Jurek Ulli 2 Tent
Covered ventilation elements ensure air exchange inside the Jurek Ulli 2 tent while limiting the direct penetration of rain. The vestibule can also be used for cooking, provided that the corresponding safety principles are observed.
Additional Information
- Packed dimensions: Ø 16 × 42cm
- Seasonal use: year-round
- Flysheet colour: cedar green
Accessories
- 1× inner tent
- 1× flysheet
- 10× tent peg
- 1× duralumin pole SM 7001-T6, Ø 8.5mm, length 345cm
- 1× duralumin reinforcement SM 7001-T6, Ø 9.5mm, length 114.5cm
- 4× guying cord, 2m long
- 1× tent bag
- 1× peg bag
- 1× pole bag
- 1× repair kit with a self-adhesive patch and a 12cm duralumin tube
Water Column
Indicates the resistance of the fabric and seams to water penetration. It specifies the amount of water the material can hold before it starts to leak. The higher the value in mm, the higher the tent's resistance. Every tent should have a flysheet with a water column of at least 2,000mm, which is approximately the pressure exerted by a raindrop travelling at 80–90 km/h. To survive a storm unscathed, a water column of at least 3,000mm is safer. For the groundsheet, a water column of 5,000mm is recommended for general hiking. For more demanding conditions, choose a groundsheet with a water column of 8,000–10,000mm.Specifications
Type
Tent pitching
Features
Unpacked dimensions
Packed dimensions
Accessories
JUREK S+R s.r.o., Kunčice pod Ondřejníkem č.p. 766, 73913 Czech Republic, +420 556 850 032, [email protected], www.jurek.cz
Specifications can be changed without notice. Images are for illustrative purposes only.
