Tenda A30

Reliable wireless AP for easy expansion of your network sharing of broadband Internet access over a wireless network. Supports modes access point connected to the LAN jack, as well as repeater mode Where extend the reach of WiFi signal . Supports wireless standard WiFi 802.11n That makes it possible to transfer data via two antennas at speeds up to 300 Mbit/s .

You will be served a new, ingeniously designed chipset Broadcom BCM5357 codenamed Intensi-fi, which reaches a maximum transmission speed up to 95 Mb/s with a consumption of only 8 Watts ! Dynamically off-chip components, thereby reducing energy consumption.

Supports most powerful WPA2-PSK , The ability to disable broadcast name of your wireless network (SSID) MAC address filtering , Port forwarding and other standard network functions. Content Filtering provides control access to inappropriate websites. Of course, the configuration settings using a web browser before the web interface that is clear and a simple guide in English .

Features and Specifications :

Supported standards:
IEEE 802.11g/b/n

Wireless modes:
AP, WDS Repeater, Repeater

Transfer rate:
Up to 300 Mb/s

Antenna:
2 x 5 dbi
undismountable

Sensitivity:
-87 DBm @ 11 Mb/s
-72 DBm @ 54 Mb/s
-68 DBm @ 270 Mb/s

Output:
<20 dBm (EIRP)

Security:
WPA-PSK, WPA2-PSK, MAC ACL, URL filtering

Network functions:
DHCP Client, WDS, QoS (802.11e WMM)

Chipset:
Broadcom BCM5357

Consumption:
8W

Interface:
1 x RJ-45 10/100 BaseT Fast Ethernet (LAN)

Dimensions:
133 x 87 x 24.7 mm

Weight:
105 g