MULTIPA dust cover for ramp brake 161/251
Truck Accessories - to protect the draw tube of the AL-KO 161S and 251S ramp brake, protrusion for inserting the cuff into the groove of the sleeve, specially shaped front part, 2 tabs to put the cuff over the head and the nut, material rubber, dimensions 56 × 60 × 125 mm
Show full description
161,-
Warranty 24 months
Code:
AUPR324807
MULTIPA dust cover for ramp brake 161/251
161,-
In stock > 10 pcs at the supplier's
Buy
MULTIPA dust cover for ramp brake 161/251
Rubber cap, dust cap for AL-KO type 161/251 ramp brakes.
The rubber sleeve is designed to protect the pulling tube of the AL-KO 161S and 251S ramp brake from weather and dirt. We recommend replacing a cracked or otherwise damaged cuff as soon as possible. Otherwise, a rusted or dirty towing tube will quickly damage the ramp brake bushings.
The rear circular hole of the cuff is fitted with a protrusion on the inside for inserting the cuff into the groove of the ramp brake sleeve (the diameter of the sleeve inside the groove is 60 mm). The front part of the cuff is specially shaped to surround the ball coupling mounted on the towing tube. There are two tabs on the side of the cuff designed to thread the cuff over the head and nut of the rear coupling bolt. The total length of the cuff in the extended working position on the ramp brake is approx. 12.5 cm.
Dimensions: 56 mm (diameter 1) x 60 mm (diameter 2) x 125 mm ( length )
The rubber sleeve is designed to protect the pulling tube of the AL-KO 161S and 251S ramp brake from weather and dirt. We recommend replacing a cracked or otherwise damaged cuff as soon as possible. Otherwise, a rusted or dirty towing tube will quickly damage the ramp brake bushings.
The rear circular hole of the cuff is fitted with a protrusion on the inside for inserting the cuff into the groove of the ramp brake sleeve (the diameter of the sleeve inside the groove is 60 mm). The front part of the cuff is specially shaped to surround the ball coupling mounted on the towing tube. There are two tabs on the side of the cuff designed to thread the cuff over the head and nut of the rear coupling bolt. The total length of the cuff in the extended working position on the ramp brake is approx. 12.5 cm.
Dimensions: 56 mm (diameter 1) x 60 mm (diameter 2) x 125 mm ( length )
VAPOL CZ s.r.o., Zašová 270, 756 51 Zašová, [email protected]
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
