Richter Czech R.701. ZB.90. MD. TB3
Richter Czech R.701. ZB.90. MD. TB3
Richter Czech R.701.ZB.90.MD.TB3 security hardware increases the protection of your entrance door. It meets the requirements for security class RC3 according to ČSN EN 1627 and holds an NBU certificate. The pull handle-lever handle escutcheon plate design with 90mm spacing is designed for doors with a thickness of 40 to 55mm. The outer escutcheon plate, made from a steel forging, is complemented by a rose with anti-drill protection, making forced entry attempts more difficult. The PVD surface treatment enhances the mechanical resistance of the hardware.
Key features of the Richter Czech R.701.ZB.90.MD.TB3 pull handle-lever handle RC3 security hardware
- Designed for doors 40–55mm thick
- Classified in security class RC3 according to the ČSN EN 1627 standard
- Certified by the National Security Authority as type 3 (SS4=2)
- Pull handle-lever handle design with 90mm spacing
- Outer escutcheon plate made from a steel forging
- Steel rose with anti-drill protection for the cylinder
- PVD technology surface treatment
- Modular system for component replacement
- Weight 2.04kg
High level of security
Richter Czech hardware falls into security class RC3, which is defined by the ČSN EN 1627 standard. Certification from the National Security Authority as type 3 (SS4=2) confirms its suitability for protecting sensitive information. The basis of the protection is an outer escutcheon plate made from a steel forging, which is complemented by a steel rose with anti-drill protection for the cylinder lock. Both elements have a hardness of 52 HRC, which makes them significantly more difficult to overcome mechanically.
Hardware construction and installation
The escutcheon plate hardware has a pull handle-lever handle design and is suitable for right-hand doors. It is intended for door thicknesses of 40 to 55mm with 90mm spacing. The base is made of steel, while the hardware itself is stainless steel. For correct function and security, you must use a cylinder lock (PZ type) with an overhang of 15 to 18mm beyond the outer side of the escutcheon plate. The oval shape of the rose completes the overall look.
Durable surface and modular system
The surface of the hardware is treated with PVD (Physical Vapour Deposition) technology, which creates a thin but very hard layer. This protects the stainless steel surface from scratches and abrasion. The hardware is also equipped with a modular system for component replacement. In the event of damage or wear, you don't have to change the entire mechanism; you just replace the specific part, such as the lever handle or pull handle.
The hardware is designed for installation on right-hand doors. For correct installation and security function, you must ensure the cylinder lock has an overhang of 15–18mm.
Specifications
Use
Usage
Material
Features
Dimensions
Design
Richter Czech s.r.o, Ve Žlíbku 1800/77, Praha 193 00, Česká republika, +420 604 239 135, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
