Elk Mini-B 1:16 RTR Yellow
- Help and manuals
- Specifications
- Photos & Videos 10
- Alternatives 8
- Accessories and suggested products
Elk Mini-B 1:16 RTR Yellow
RC car Losi Mini-B RTR in 1:16 scale with suspension geometry taken from TLR 22 platform, waterproof electronics and 2.4GHz RC kit. Oil dampers allow off-road and on-road riding, and the long, high-lift axle arms make it easy to tackle any surface. You can race the Mini-B in the garden, in the car park or outdoors. The unpretentious and compact model has proportional control and the control is provided by a mini servo. A 2.4 GHz transmitter is included for control. Using the model is very simple. Charge the included LiPol Dynamite 7.4 V 650 mAh 2S battery with the USB charger, insert the included 4 AA batteries into the transmitter, turn on the transmitter, insert the battery into the model, turn on and drive.
Key features RC remote control car Losi Mini-B 1:16 RTR, yellow
- The platform of the larger TLR 22 Buggy is used
- Centre engine mounting
- Aluminium chassis 1.5 mm 6061-T6
- Oil adjustable shock absorbers
- Fully assembled and ready for operation
- LiPo battery 7.4 V 650 mAh with EC2 connector
- Battery secured by elastic band
- Motor Dynamite Brushed 280 47T
- Wheels with BK tyres
- Fully fitted with ball bearings
- Servo Spektrum SX107 and efficient Servo Saver
- Waterproof electronics
- Suspension geometry 22
- Suitable from 14 years of age
Smaller brother of the big car 1:10, TLR 2WD Buggy
The Mini-B Buggy RC car model is based on the current TLR 2WD buggy platform and uses the latest experience and technological innovations. The model is larger than the previous version, has a new design, is more stable on the track and has higher speed and better handling. RC model of Mini-B car is completely assembled and has finished painted body.
Mid-engine configuration, aluminium chassis and oil-filled shock absorbers
The engine is positioned in the chassis axis in front of the front axle, so the model has a balanced chassis that allows better performance on different surfaces not only due to better traction but also better stability and more precise steering response. The Mini-B is built on a 1.5 mm thick, 6061-T6 grade aluminium base plate. Aluminum chassis has greater strength, durability and rigidity. The shocks have threaded sleeves that allow easy preload adjustment and thus ride style. In addition, the shock bodies are fitted with a rebuildable, bottom-filled shock insert with two O-rings to increase tightness and keep oil in the shocks.
RC kit 2,4 GHz, front and rear tyres
The transmitter for model control has proportional control of direction and motor speed. In addition, it has a steering and throttle reverse function and the ability to adjust the size of the deflections and trims (setting the middle position of the deflection). Taper Pin front tyres mounted on discs are one of Losi's most popular tyre types. The BK Bar rear tyres mounted on rims are proven Losi tyre designs. The rear driven wheels are wider and the BK Bar tyre can cope with a variety of surfaces and can handle both hard and loose ground.
Full ball bearing, efficient servo saver and waterproof electronics
The Mini-B RC car model is equipped with ball bearings that increase performance by reducing frictional resistance in rotating drivetrain components. At the same time, the service life and durability of the components will be increased. A flexible servosaver is installed on the output shaft of the steering servo's millisecond output shaft to absorb shock from the wheels. It has a multi-layered construction, which makes the ride safer while ensuring precise steering. The receiver and servo electronics are waterproof and allow for driving in wet environments under the conditions specified in the manual.
TLR suspension geometry and tuning parts
The Mini-T 2.0's suspension geometry was derived from the TLR 22 Buggy 2WD and provides balanced steering and excellent traction. Optional tuning aluminium components are produced for the Mini-B, which are more durable and can provide greater rigidity for certain structural groups.
LiPol battery Dynamite Reaction 2, 2S, 650 mAh
In the package you will find a 2S 650 mAh LiPol battery, which can be charged with the included USB charger. Thanks to the LiPol battery, the model is very agile and nimble. Included in the package is a standard USB charger, which you can use to charge the LiPol battery. You can use the output of a regular PC or a USB power supply with QUALCOMM Quick Charge 2.0/3.0 support. USB power supplies are commonly sold in electronics stores.
Accessories for normal operation
For normal operation of Losi RC cars you need bolt glue, good quality tire glue, silicone oil for shock absorbers and a set of screwdrivers. A set of car tools or a quality set of Allen screwdrivers 1.5/2.0/2.5/3.0 mm is recommended. The thread or head of the bolt is covered with bolt glue to fix it and the vibrations caused by driving will not allow the bolt to loosen. The screw adhesive has a special formulation that allows the screw joint to be easily loosened with adequate torque without damaging the screw head. Never use regular instant glue, as it may be impossible to loosen a screw that is glued in this way. Tyre adhesive is used to glue the tyres to the rim of the disc. It is always necessary that the tyre is firmly glued to the wheel rim around its entire circumference. If the tyre is not glued all the way around, the tyre may tear. The tyre adhesive has a special formulation that is able to bond materials such as rubber or nylon, while at the same time making the adhesive flexible once it has set. Never use regular instant glue - it is not flexible once it has set and cracks will gradually form in the tyre around the rims. Occasionally it is necessary to add silicone oil to the shock absorbers of the model. Normal operation results in only minor leaks of silicone oil down the piston rods of the shock absorber. If the surface of the shock absorber piston rods or the condition of the seals is in poor condition, the oil leakage can be large. For these cases, so-called. repair kits. In the tuning parts range, all shock absorbers are supplied with extremely hard TiN (titanium nitride) coated piston rods. The TiN-coated piston rods are easily recognizable by their golden-green colour.
Features and technical specifications
- Scale: 1:16
- Oil dampers
- DC motor
- Drive: 2WD
- Ball bearings
- Complete and waterproof electronics
- Shock absorber oil: 22,5 wt
- Differential oil: lubricant
- Shashi: 1.5mm aluminium plate, 6061-T6
- Weight: 1,22 kg
- Dimensions: 272 × 178 × 102 mm (l × w × h)
- Discord: 190.5 mm
- Battery compartment: 100 × 50 × 30 mm
Package contents
- RC model Losi Mini-B 1:16 2WD RTR (yellow) - fully assembled and ready to drive. The model is already equipped with a receiver with 2.4GHz controller, Dynamite 280 47T motor and Spektrum SX107 servo
- Horizon 2.4 GHz 3-channel transmitter (Spektrum SLT2) - ergonomic controller with precise control, powered by 4× AAA batteries
- LiPo battery Dynamite 7,4 V 650 mAh 2S 20C - drive battery with EC2 connector
- LiPo charger Dynamite USB 2S - simple USB charger compatible with the supplied battery
- 4× AAA batteries - for transmitter
- Socket wrench - for wheel changes and basic servicing
- Instructions for use in Czech and multilingual manual (EN, DE, FR, IT)
Specifications
Age and intended use
RC model type
Scale
Features
Control type
Colour
Dimensions
Included
Model power supply
Controller power supply
Battery
Specifications can be changed without notice. Images are for illustrative purposes only.
