SIEMENS KI41RADC0 iQ500

- Help and manuals
- Specifications
- Photos & Videos 16
- Alternatives 8
- Accessories and suggested products
SIEMENS KI41RADC0 iQ500

SIEMENS KI41RADC0 iQ500 Built-in Fridge
The SIEMENS KI41RADC0 iQ500 built-in fridge provides a well-organised space for the everyday storage of fresh food. The hyperFresh drawer offers more room for fruit and vegetables and helps maintain a suitable level of humidity, while the autoAirflow system distributes cool air evenly throughout the entire interior. Energy class C and an exceptionally low noise level of class A combine economical operation with high levels of comfort.

Why Choose the SIEMENS KI41RADC0 iQ500 Fridge?
Energy Class C:
economical operation with stable cooling performance
Noise Class A:
exceptionally quiet operation between 27 and 29dB
hyperFresh:
spacious drawer with suitable humidity for fruit and vegetables
Made in Germany:
quality craftsmanship, modern technology, and sophisticated details
softClosing:
gentle, automatic closing of the door at an angle of 20° or less

Noise Class A – Cooling as Quiet as a Whisper
The SIEMENS KI41RADC0 iQ500 fridge falls into the quietest noise emission class, A. The noise level, between 27 and 29dB, is comparable to a very quiet whisper. Its operation will therefore not disturb you while working, relaxing, or dining together, which you will also appreciate in kitchens connected to a living space.

hyperFresh – More Space for Fruit and Vegetables
The extra-large hyperFresh drawer provides plenty of space for fresh fruit and vegetables. It helps maintain a suitable level of humidity, which prevents them from drying out prematurely. This allows food to retain its freshness, taste, vitamins, and other nutrients for longer.

autoAirflow – Even Circulation of Cool Air
The autoAirflow system distributes air evenly between the individual shelves. It helps to maintain a stable temperature throughout the entire cooling compartment, thanks to which newly added food cools faster and retains its freshness for longer.

bottleRack – Secure Storage for Bottles
The bottleRack creates a practical space for both large and small bottles and cans. Drinks remain securely stored, do not roll around on the shelves, and are always easily accessible. At the same time, they do not take up space intended for pots, containers, and other food items.

LED Lighting – All Food in Sight
Integrated LED lighting evenly illuminates the entire interior of the SIEMENS KI41RADC0 iQ500 fridge. The diodes are located at the front, so even bulkier food items do not block their light. You will have a clear view of the stored contents, from the front to the very back of the shelves.

superCooling – Rapid Chilling of New Food
The superCooling function temporarily lowers the temperature inside the fridge. It is useful, for example, before storing a large shop or a batch of food prepared for a celebration. Freshly added food cools down faster and has less of an effect on the temperature of the contents already stored inside.

Door Alarm – The Cold Stays Inside
If the door of the SIEMENS KI41RADC0 iQ500 fridge is left open for too long, a warning alarm will alert you. A timely notification helps to limit the escape of cold air, an increase in energy consumption, and the deterioration of conditions for the stored food.

Spare Parts Available for up to 15 Years
For large Siemens home appliances, standard spare parts are available for up to 15 years. The long-term availability of necessary components makes potential repairs easier and helps to extend the lifespan of the appliance.
Main Parameters of the SIEMENS KI41RADC0 iQ500 Fridge
Energy Efficiency Class
C
Sum of the Volumes of the Chilling Compartments
204L
Airborne Acoustical Noise Emission
28dB
Freshness System
drawer for longer freshness
Warning List
open door
Appliance Dimensions
1221 × 558 × 548mm
Is it possible to change the door opening direction on the refrigerator?
Yes, on most models it is possible to change the door opening direction. We recommend consulting the user manual for your specific appliance for instructions or contacting an authorized service center.
Can the refrigerator be transported lying down?
Transporting the refrigerator lying down is not recommended as it can damage the compressor. If it is necessary, let the refrigerator stand upright for at least 24 hours after transport before plugging it in.
The new refrigerator has warm side walls after starting. Is that normal?
Yes, this is normal. The condenser, which dissipates heat from the inside of the refrigerator, is integrated into the side walls, causing them to heat up.
The new refrigerator does not have fins (evaporator, condenser) on the back wall from the outside, but some kind of cardboard. Should we remove this cardboard?
No, do not remove this cover. It is often made of a sturdy material resembling cardboard and serves as protection and insulation for the back of the appliance.
The compressor/motor of the new refrigerator turns on very frequently and for a long time. Is that normal?
Yes, with new refrigerators, especially those with an inverter compressor, it is common for them to run longer initially to reach the set temperature. Modern compressors can operate for longer periods at lower power.
There is a plastic tube covered with tape on the compressor of the new refrigerator. Should I remove it?
No, do not remove the plastic wrap, tape, or any other protective elements on components that are not explicitly marked for removal after transport. To be sure, check the installation manual.
There is a large amount of moisture in the vegetable drawer (or under the vegetable drawer) of the refrigerator, or a large amount of water is forming in this area.
Check if the drain hole at the back of the refrigerator is clogged. Increased moisture can also be caused by storing unwashed or unwrapped vegetables.
What is the difference between No Frost and Low Frost?
No Frost technology completely prevents ice buildup in the freezer through air circulation, so it never needs to be defrosted. Low Frost technology significantly reduces ice formation, but occasional manual defrosting is still necessary.
Is it possible to adjust the temperature for the freezer?
Yes, on most combination refrigerators, the freezer temperature can be adjusted independently of the cooling section. The optimal temperature for the freezer is -18°C.
Why does the refrigerator activate the Supercooling and Superfreezing functions on its own?
Some models may activate these functions automatically after the door has been open for an extended period or when a large amount of new food is added, in order to quickly restore the optimal temperature.
Water is dripping down the back wall in the cooling compartment. Is that normal?
Yes, this is part of the automatic defrost cycle. The water runs down into a drain hole and evaporates. Make sure the drain hole is not clogged.
Why does the Alarm beep and flash after connecting the new refrigerator? Is it an error?
This is not an error. The alarm indicates that the internal temperature has not yet reached the set level. Once the refrigerator cools down sufficiently, the alarm will turn off automatically.
The Alarm is flashing on the refrigerator, but the temperature inside the refrigerator has not changed.
The alarm can also indicate other conditions, such as an open door or a power failure. Check the display for a specific error code and consult the manual.
After changing the door opening side, the fruit/vegetable drawers cannot be pulled out.
Check that the door is installed correctly and opens to a sufficient angle. The problem may also be due to improperly seated hinges.
Can oven trays fit in the refrigerator?
Standard baking trays do not fit into most regular refrigerators. Some premium models may have a special compartment or flexible layout that allows for this.
Is it possible to individually turn off the freezer/cooling compartment?
On some models, usually those with two compressors or special features, it is possible to temporarily deactivate one of the compartments. This is not typically possible on standard models.
How long should the appliance be left idle during transport?
After transport, especially if it was not kept upright, it is recommended to let the appliance stand idle for 4–6 hours, ideally up to 24 hours, before plugging it into the power outlet.
Can the shelves and drawers be removed when the door is open at a 90° angle?
On most models, the door must be opened more than 90° to comfortably remove the internal shelves and drawers. You can find precise information in the product's technical specifications.
For questions about Siemens large home appliances, you can find all the useful information here.
This is a built-in appliance, the front panel on the door is not included.
Specifications
Refrigerator energy parameters
Refrigerator type
Refrigerator functions
Refrigerator interior layout
Refrigerator dimensions
Refrigerator colour
Refrigerator weight
Refrigerator refrigerant type
Refrigerator package dimensions
Power outlet type
Refrigerator maximum ambient temperature
Siemens Aktiengesellschaft, Werner-von-Siemens-Straße 1, 80333 München, Spolková republika Německo, [email protected], +49 89 3803-5491
Specifications can be changed without notice. Images are for illustrative purposes only.






