NIKWAX Fabric & Leather Proof 300 ml
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 1
- Alternatives 8
- Accessories and suggested products
NIKWAX Fabric & Leather Proof 300 ml
NIKWAX Fabric & Leather Proof is a high-performance impregnator designed to revive the breathability of all footwear made of textile, leather and a combination of these two materials. This impregnation is easy to apply, adds water repellency and revives breathability without softening the skin. It enhances the performance of footwear and keeps feet warm and dry. The product is non-flammable and does not contain PFCs (perfluorinated chemicals). NIKWAX Fabric & Leather Proof is recommended for Gore-Tex® and eVent®, BDRY® and all other waterproof combination footwear.
Key features of NIKWAX Cotton Proof impregnation
- NIKWAX impregnator for textile and/or leather footwear
- High-performance and easy to use
- Adds water repellency
- Revives breathability without softening the skin
- Increases shoe performance
- Keeps feet warm and dry
- Non-flammable and PFC-free
- Recommended for Gore-Tex® and eVent®, BDRY® and other waterproof combination footwear
Use:
Apply Nikwax Fabric & Leather Proof™, by hand
scrub the contamination with a damp cloth and clean with Nikwax Footwear Cleaning Gel™. Shake well before use. Protect the work surface. Spray from a distance of 5 cm or apply with a sponge. Carefully remove excess drops and allow to dry naturally. Allow footwear to dry at room temperature away from direct heat sources.
Note:
Light and coloured fabrics and/or leather may darken after treatment. First test in a hidden location. Always allow the footwear to dry naturally. Paper can be stuffed into the fingers to absorb excess moisture, which must be replaced after getting wet. Keep footwear away from fires and radiators, drying too quickly can cause cracking of the leather and peeling of the glued soles.
Specifications
Usage
Features
Specifications can be changed without notice. Images are for illustrative purposes only.
