Bude toto zařízení správně napájet access point HP M220?
Tenda PoE30G-AT PoE injector
PoE Injector - 802.3af/at broadcast PoE (Power over Ethernet), GLAN, 30W, 48V, automatic detection of PD
Show full description
599,-
Shop faster with pickup at AlzaBox or in-store.
Warranty 36 months
Code:
NU439a
Producer's Website:
Tenda PoE30G-AT PoE injector
599,-
In stock > 10 pcs
Buy
Tenda PoE30G-AT PoE injector
Gigabit PoE Injector Simultaneously Transmits Data and Power
This single port Gigabit PoE injector PoE30G-AT from Tenda Technologies supports standard IEEE 802.3af (15.4W) and 802.3at (30W). This enables simultaneous transmission of power and data to the active element via a single Ethernet cable category 5 or greater. This eliminates the need to access an electrical outlet near the active device. The injector is primarily used to power all the devices that support PoE standard 802.3af and 802.3at such as wireless access points AP, IP cameras, IP phones, etc.
Features of the Tenda PoE30G-AT
- Standards: 802.3af 802.3 802.3 802.3 802.3
- Transmission speed: 10/100/1000Mb/s FD
- Method of control: without management
- Network functions: automatic detection of PD devices
- Interface: 1 x GbE LAN (Data IN), 1 x GbE LAN (PoE + Data OUT)
- Power Input: 230V AC
- Power Output: 48V DC, 30W
- Consumption: 2.2W
- Cooling: passive
- Operating temperature: 0° to 40°C
- Dimensions: 170 x 200 x 46mm
- Weight: 0.5kg
Automatic Detection of PoE
The Tenda PoE30G extra-AT can automatically detect whether the powered device supports PoE supply. If it does not, the PoE30G-AT sends data to the device only while the power is activated to prevent irreversible damage to the powered device! The transmission speed LAN ports are 10/100/1000 Mb/s full-duplex. The maximum supplied power is 30 watts.
Package contents
1 x Tenda PoE30G-AT
1 x Quick Installation Guide (CZ, SK, PL)
1 x Power Cord
Certificates and Manuals
CE certification (Certificate of conformity)
Declaration of Conformity (Declaration of conformity)
Manuals
Complete Manual setting (EN)
WDS mode settings on the router with Broadcom chipset Tenda
Firmware
CAUTION: First check your current firmware version, then choose the correct version of the firmware download. If the drive firmware version is recorded incorrectly, any complaints will not be considered.
It is recommended to upgrade the firmware using an Mozilla Firefox or Internet Explorer internet browser.
Specifications
PoE standard
Maximum output power per port
Number of PoE ports
Output voltage
Number of LAN ports
PoE type
PoE standard
PoE properties
Maximum output power per port
Number of PoE ports
Output voltage
LAN port properties
Number of LAN ports
Features
Design
Functions
Minimum operating temperature
Maximum operating temperature
Dimensions and weight
Width
Height
Depth
Weight
Colour
Colour
More Specifications
INTELEK LTD, organizační složka, Ericha Roučky 1291/4, Brno, 627 00, Czech Republic, www.intelek.cz, 533 338 858, [email protected]
INTELEK LTD, organizační složka, Ericha Roučky 1291/4, Brno, 627 00, Česká Republika, [email protected], +420 533 338 888, www.tenda.cz
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
