Tenda W301

The wireless access point supports the latest WiFi standard 802nd11n with transfer speeds up to 300 Mbit/sFair baud rate is about 90 Mbit/s, which is still 6 times more from the previous standard 802nd11g, with which the access point is backward compatible.To maximize the 802nd11n standard, the device is equipped with a Gigabit LAN port.The device can operate in several modes as a classical AP, P2P Bridge, P2MP Bridge and AP Repeater.Reception and signal propagation by two internal antennas on the performance of 2x 3 dBi.Of course there is the strongest support for WPA2 in combination with the 802nd1, the option to disable SSID broadcast, MAC address filter and packet filter.Local and remote management is done via the web interface or using the new SNMP v1 or v2.The device can be powered in two ways - through an Ethernet cable directly support the Power over Ethernet (PoE 802nd3AF) or the included AC adapter.Its use is ideal for home and small to medium businesses and hotels to extend their existing network.Thanks to its design and PoE power device may be mounted on the wall.Mounting kit is included.

Specifications:

Operating modes:
Access Point
Repeater
P2P Bridge
P2MP Bridge

Supported wireless network:
IEEE 80211b (11 Mbit/s, 2.4 GHz)
IEEE 80211g (54 Mbit/s, 2.4 GHz)
IEEE 80211n (300 Mbit/s, 2.4 GHz)

Antenna:
Type: Internal
Power: 2x 3 dBi

Output:
20 dBm

Sensitivity:
-92 DBm

Modulation:
DSSS, OFDM

Administration:
Through HTTP
SNMPv2

Security:
WEP
WPA/WPA2
IEEE 8021

Interface:
1x RJ-45 (LAN 1000 Mbit/s)

Dimensions:
145 x 145 x 32 mm (L x W x H)

Weight:
650 g