W-STAR WStar050MMCX 2.4GHz 5 dBi MMCX
W-STAR WStar050MMCX 2.4GHz 5 dBi MMCX
The W-STAR WStar050MMCX internal WiFi antenna is used to receive and transmit a wireless signal in the 2.4GHz band for 802.11b/g/n standards. The omnidirectional rod antenna works with WiFi 4 and radiates in the horizontal plane over a full 360° and in the vertical plane at a 40° angle. The polyurethane construction has a total length of 190mm, a diameter of 13mm and a weight of 20g, with a total height of 195mm. The device transmits a signal with vertical polarisation and helps to stabilise wireless data transmission for routers, access points, wireless cards and client stations. The design parameters meet the requirements for integration into small electronic devices and industrial modules. The antenna is used in Internet of Things sensors, smart home devices with Zigbee or Bluetooth standards, and in embedded computers. The compact dimensions make it easy to install in tight equipment cabinets, laptops, drones and remote-controlled RC models operating in the 2.4GHz band.
Key Features of the W-STAR WStar050MMCX, 2.4GHz, 5dBi, MMCX WiFi Antenna
- Omnidirectional radiation angle covers a 360° range horizontally
- 5dBi gain increases the range of the wireless signal in the 2.4GHz band
- Integrated 20cm cable facilitates installation inside the device
- MMCX connector ensures a firm mechanical and electrical connection
- Polyurethane body with a length of 190mm has high mechanical resistance
- Temperature range allows for use in environments from -20 to +65°C
2.4GHz Wireless Band
The W-STAR WStar050MMCX WiFi antenna operates in the 2.4 to 2.5GHz frequency range, which corresponds exactly to the 2.412–2.483GHz frequency. The antenna gain is 5dBi, which contributes to increasing the range of the wireless signal in buildings. Vertical polarisation and an impedance of 50 Ohms help with stable wave propagation in enclosed spaces. The VSWR (Voltage Standing Wave Ratio) is 2.5 or less, which limits unwanted signal reflections during data transmission.
Direct Connection and Operational Durability
The W-STAR WStar050MMCX WiFi antenna includes an integrated 20cm cable, which terminates in a male MMCX connector. The design eliminates the need for an additional pigtail, reducing attenuation at the joints and simplifying the connection. The antenna can be connected directly to Wi-Fi cards, embedded modules and wireless boards without additional adapters. The MMCX connector ensures a firm mechanical and electrical connection with its counterpart. The polyurethane sheath material used protects the internal radiator from mechanical damage during handling and installation. The device operates reliably in a temperature range of -20 to 65°C, making it suitable for common indoor and less-protected industrial installations. The low weight of 20g does not put any strain on the connectors of the connected PCBs and internal cards.
Connector type:
MMCX
Cable length:
20cm
Impedance:
50 Ohm
Temperature range:
-20 to 65°C
Specifications
Standards and frequency
Dimensions and weight
Antenna features
Specifications can be changed without notice. Images are for illustrative purposes only.
