APC Power Saving Back-UPS Pro 1500 Euro sockets

The APC Power Saving Back UPS Pro 1500 provides backup power for medium-performance devices. It also protects connected devices against damage resulting from overvoltages and voltage peaks. It includes automatic voltage control that continuously adjusts high and low voltages to safe levels, so the connected devices operate at constant voltages, whether over voltage or undervoltage occurs in the network. The APC Back UPS Pro 1500 also includes a variety of "green functions", such as plug-in power off of a connected device or high efficiency of the entire UPS.

In total, you have six Euro sockets, three of which are protected by overvoltage protection and powered by a battery (one with a power-saving function), and three only with overvoltage protection (three with power-saving functions). Batteries without battery power are suitable, for example, for devices that do not require continuous power. The UPS also features a clear LCD panel and administration ports.

Parameters and specifications:

Exit:
Output power: 865W/1500VA
Rated output voltage: 230V
Efficiency at full load: 89%
Efficiency at half load: 85%
Course type: iteration approximation of the sine wave

Output connections:
A total of six French/Belgian outputs
3x French/Belgian (battery backup)
3x French/Belgian (surge protection)

Input:
Rated input voltage: 230V
Input frequency: 50/60Hz +/- 3Hz (autodetection)
Input connection type: French/Belgian
Cable length: 1.83m

Battery and run time:
Battery type: maintenance-free lead-acid sealed battery with suspended electrolyte (not flowing)
Typical charging time: 8hrs
Replacement battery: APCRBC124
Number of battery modules: 1

Runtime according to load:
50W: 2hrs 3min / 100W: 1hr 13min / 200W: 38min / 300W: 25min / 400W: 18min / 500W: 13min / 600W: 10min / 700W: 8min / 800W: 6min

Communication and administration:
Control panel: multifunctional LCD status and control console
Audible alert: battery status notification / clear battery low warning / uninterrupted overload warning

Overvoltage protection and filtration:
Shock Energy: 445J
Filtration: continuous multipole noise filter / IEEE surge arrester 5% / zero key response time
Data line protection: analogue telephone line for telephone, fax, modem and DSL (RJ-11 connector), 10/100/1000 Base-T Ethernet network (RJ-45 connector)

Administration interface:
USB port
RS-232 serial interface

Environment:
Audible noise at 1m from the surface of the unit: 45dBA
Operating relative humidity: 0 - 95%
Operating environment: 0 - 40°C

Design:
Black colour
Dimensions: 301 x 112 x 380mm
Weight: 12.7kg