AudioDesign PMU 2214 HBP
AudioDesign PMU 2214 HBP
The AudioDesign PMU 2214 HBP wireless system transmits audio for performances, lectures or streams. This complete set includes one common receiver and four transmitters that operate in the UHF band. Users have four independent channels on one receiver for the simultaneous operation of multiple microphones without mutual interference. The system transmits an audio signal in the frequency range from 40Hz to 18kHz with a deviation of +/- 3dB. The system uses analogue transmission technology and is suitable for stages and lecture halls.
Key Features of the AudioDesign PMU 2214 HBP Wireless System
- The batteries in the transmitters last up to 6 hours
- The receiver has four independent channels for the simultaneous operation of four transmitters
- The system uses the UHF band with one hundred tunable frequencies ranging from 480 to 529.75MHz
- The transmitters have a signal range of up to 100m in open space
- The receiver has four separate XLR outputs and one mixed Jack output
- The Auto Scan function searches for suitable free frequencies nearby
Transmitters
The set includes two dynamic handheld microphones and two headset microphones with flesh-coloured bodypacks. The metal handheld transmitters are 245mm long and have a head diameter of 52mm. The 65 × 105 × 24mm bodypacks are attached to a belt with a clip and offer a three-pin mini XLR input connector for connecting the headset microphones. The transmitters are powered by AA batteries, which last up to 6 hours.
Signal Transmission and Frequency Bands
The system operates in the UHF band at frequencies from 480MHz to 529.75MHz, offering a total of 100 tunable frequencies. The wireless transmission works with an output power of 10mW and the signal has a range of up to 100m in open space. The Auto Scan function searches for a suitable free frequency. The receiver and transmitters are synchronised using integrated IR beams.
Receiver Connectivity and Outputs
The receiver offers connection options to mixing desks or amplifiers. On the rear panel, there are four independent XLR outputs and one mixed output with a 6.3mm Jack connector for a combined signal. Each channel has a separate volume control on the front of the receiver. Detachable antennas on the rear facilitate transport and installation.
Controls
Users control the parameters using the controls on the front panels of the receiver and transmitters. Both the receiver and the microphones have a built-in display and status light that shows the charge level of the inserted batteries in real time. The Mute button on the body of the transmitters is used to instantly mute the sound without having to turn off the entire device. A rack-mounting kit is also included.
Operating Multiple Sets
The wireless system allows multiple microphones to be operated simultaneously in one location. Up to five complete sets can be operated in one space at the same time. This means connecting up to twenty separate transmitters without mutual signal interference. The system uses analogue transmission technology with low distortion. The receiver is powered by the supplied mains adapter.
Package contents:
2× handheld wireless microphone, 2× bodypack, 2× headset microphone, 1× four-channel receiver, Jack 6.3 - Jack 6.3 cable and mains adapter, rack mounting kit
Wireless technology:
UHF
Microphone type:
Handheld (in clamp), Headset
Receiver connectors:
6.3mm Jack, XLR
Transmitter connector:
XLR
Range:
100m
Frequency range:
40Hz - 18,000Hz
Maximum battery life:
6 hours
Number of channels:
4
Power:
0.01W
Specifications
Connection
Microphone characteristics
Power Supply
Battery
Features
Dimensions
Weight
AUDIODESIGN srl Via dell’Industria 28 42025 Corte Tegge, Cavriago (RE), Italy +39 0522 941444 [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
