KochChemie MICRO CUT FINISH P3.01, 1000ml
KochChemie MICRO CUT FINISH P3.01, 1000ml
KochChemie MICRO CUT FINISH P3.01 micro-polishing compound is part of a high-quality car care range from the German manufacturer, Koch-Chemie. It is the most advanced, final micro-particle polishing compound designed for machine polishing up to a 3000 grit finish. This micro-polishing compound contains Carnauba wax and non-volatile silicones. This ensures long-lasting paint preservation while achieving a brilliant, high gloss and a smooth surface, even on dark shades and in extreme light conditions. It is suitable for all types of paint, including scratch-resistant ones. It is ideal for the permanent, mechanical removal of holograms, fine scratches and polishing marks.
Key Features of KochChemie MICRO CUT FINISH P3.01 Car Care
- A high-quality product from the German car care brand KochChemie in a practical, large pack
- Micro Cut Finish P3.01 micro-particle polishing compound for machine polishing
- Allows for machine polishing up to a 3000 grit finish
- Micro-polishing anti-hologram polish with Carnauba wax and non-volatile silicones
- Treatment with Micro Cut Finish P3.01 guarantees long-lasting paint preservation
- Polish for a high gloss and a perfectly smooth surface, even on dark and delicate shades
- Car care for removing holograms, fine scratches, and polishing marks
- KochChemie polish suitable for all paint types, including scratch-resistant ones
Field of use:
Paintwork of cars, commercial vehicles, motorcycles.
Cut level:
3.2
Gloss level:
9.5
How to use:
Shake well before use. Test for suitability and compatibility before using. Wash the surface to be treated and allow it to dry completely. Apply the polish evenly to the entire surface of a dry or new polishing pad. With the polisher still switched off, spread the polish in a thin layer over the paintwork. Then, using a rotary polisher, polish with crosswise movements and medium pressure until a transparent film is formed (until the aluminium oxide contained in the polish has completely broken down). Do not use polishing pads used for this product for other products. To remove polish residue without scratches or streaks, use a professional microfibre cloth. Protect from frost and excessive heat. Do not use on hot surfaces.
Tip:
For optimal results, the manufacturer recommends using the KochChemie Micro Cut Pad (purple) and an orbital polisher with forced rotation (e.g. Makita PO5000C, highest speed) for polishing. Alternatively, a rotary polisher can be used in combination with the KochChemie Micro Cut Pad (purple) to polish surfaces.
Choose the optimal pack size for your polishing compound:
KochChemie MICRO CUT FINISH P3.01 Micro-Polishing Compound – 250ml volume
KochChemie MICRO CUT FINISH P3.01 Micro-Polishing Compound – 1000ml volume
Specifications
Use
Volume
Use
eko GRADO spol. s r.o., Skyřická 110,43401 Most, [email protected], +420723691602
Specifications can be changed without notice. Images are for illustrative purposes only.
