MOTIP DUPLI TS PTFE dry lubricant 500ml
MOTIP DUPLI TS PTFE dry lubricant 500ml
Release seized parts with MOTIP PTFE Dry Lubricant and ensure that your windscreen wipers, seat belts, door locks, hinges, etc. work smoothly again. PTFE Dry is a dry surface lubricant that removes oil and grease from metal and plastic parts. It has a very low friction factor which prevents wear and sticking, offers excellent adhesion, and is resistant to weathering. Suitable for parts that are subject to light loads and low speeds. It can be used as a release agent for moulds where the use of silicone is not desired.
Key features of MOTIP DUPLI TS PTFE dry lubricant, 500ml
- No oil or grease residue (dry film)
- Very low friction factor
- Prevents wear and sticking
- Suitable for parts subject to light loads and low speeds
- Suitable as a mould release agent where silicones are not desired
- Excellent adhesion
- Resistant to weather conditions
- Direct jet spray
Instructions for use:
Before use, carefully read the instructions on the packaging and act accordingly. The aerosol should be at room temperature. Best processing temperature is 10–25°C. Shake the aerosol before use. Apply PTFE Dry in a thin layer. After the solvent has evaporated (approximately 1 minute), a protective dry PTFE film will remain.
Specifications can be changed without notice. Images are for illustrative purposes only.
