Dobrý den, chci se zeptat jakým způsobem se přípravek aplikuje, zda-li je to jako sprej a stříká se to zmáčknutím jako klasický spreje a nebo je k tomu potřeba nějaká pistole jak píšete v popisu k produktu.
Würth Undercarriage protection wax black, 500 ml
Chassis Spray - wax-based, solvent-based, non-repaintable, water-repellent, anti-corrosive wax with very good penetration properties and self-healing effect, resistant to temperatures up to approximately 180 °C
Show full description
559,-
Shop faster with pickup at AlzaBox or in-store.
Add to list
Warranty 24 months
Code:
AUPR122038
Producer's Website:
- Help and manuals 1
- Specifications
- Photos & Videos 2
- Alternatives 8
- Accessories and suggested products
Würth Undercarriage protection wax black, 500 ml
559,-
Currently Unavailable
Würth Undercarriage protection wax black, 500 ml
Wax-based coating with solvent content, not repaintable. Water-repellent anti-corrosive wax with very good penetration properties and self-healing effect. The dry surface layer remains slightly tacky and is temperature resistant up to approximately 180°C, so the product can be used even in temperature sensitive areas.
Purpose of use Würth Undercarriage Protection Wax Black, 500 ml
- Universal anti-corrosion coating for vehicles, machines, machine parts and many other areas such as:
- Automotive industry
- Construction of buses and trailers
- Bodyshop
- Garages, workshops
- Metalworking industry
- Industrial use
- Boating
- Maintenance and much more
- For areas, where there is a risk of body corrosion, such as sheet metal edges (folds, gaps, flanges), edges and surfaces
- Excellent grip and very good stability on metal surfaces
Manual
Shake well or mix thoroughly before use. Surfaces to be treated must be clean, dry and free of rust, dust and grease. The product can be applied using an airless gun, a gun using a mixture with air or a pressure spray gun at 3 to 4 bar air pressure. If necessary, the product can also be applied by dipping, roller or brush. The product does not run and can be applied without overspray. Contaminated surfaces and soiled equipment can be cleaned with solvents until the product dries. The recommended temperature for application is 15 to 25 °C.
Notice
Recommended thickness of the dry layer: at least 50 μm. It is necessary to mix or shake the product before use. After use, turn the aerosol can upside down and press the valve until the nozzle is empty.
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected]
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
