AXAGON ADR-205

4.8 237 ratings
Data Cable , length: 5m, extension cable
  259,-
Shop faster with pickup at AlzaBox or in-store.

AXAGON ADR-205

AXAGON ADR-205 is an almost new item, in perfect condition, and comes with a full warranty. However, someone opened the original packaging before you. Why? It could have been an unwanted gift. For detailed information, click here.
  • .

An active 5-metre USB 2.0 extension cable, the AXAGON ADR-205. The USB repeater cable amplifies the USB signal, allowing you to connect a USB device much further away than the usual 5 metres possible with passive cables. You can also connect several repeater cables in a series. A major advantage of the ADR-205 extension is its integrated connector for auxiliary power. In most cases, power from the USB bus is sufficient, but for devices with higher power consumption over longer distances, USB power may be inadequate. Auxiliary mains power can solve this problem. The exceptionally compact body of the AXAGON repeater allows for seamless use in electrical trunking or cable management systems. The use of a high-quality shielded cable guarantees high-speed communication and minimal unwanted interference.

Input:

  • USB 2.0 for connecting to a computer
  • USB Type-A (M) male connector

Output:

  • USB 2.0 for connecting a remote USB device
  • USB Type-A (F) female connector
  • Transfer speed 480 / 12 / 1.5 Mbit/s (high / full / low speed)

Power:

  • Power for the cable and connected devices is supplied via the USB bus (bus-power mode 5V–500mA).
  • For most connected USB devices, power from the USB bus is sufficient and no additional power is needed.
  • The active part of the cable includes a connector (Ø 3.5 × 1.3mm outer × inner diameter) for additional external power of 5V/1–2A.
  • A 1.2m long USB A-M / 3.5mm jack power cable is included in the package. The cable allows for powering from a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16.
  • When powering the repeater cable with a power adapter, you can also connect an external 2.5" drive without needing a separate power supply for the drive.
  • For longer USB routes with several repeater cables connected in series, the power from the USB bus may be insufficient even for USB devices with lower power consumption than an external 2.5" drive. In this case, boosting the power by connecting a power adapter can also help.

Other features:

  • Fully compatible with USB 2.0 and backward compatible with USB 1.1.
  • Full Plug and Play and Hot Plug support.
  • Two LEDs indicate power connection and USB device connection.
  • A standard passive USB cable can also be used after the active USB cable.
  • Dimensions of the active part are 56 × 22 × 14mm, cable length 5m.
  • Weight 170g.

Supported operating systems:

  • MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 and later (all 32- and 64-bit versions of Windows OS supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
  • Note: Drivers are included with the supported operating systems and are installed automatically. No other drivers need to be installed and none are available.

Package contents:

  • USB 2.0 A-M > A-F active extension cable, length 5m,
  • USB-A / 3.5mm power cable,
  • printed multilingual manual.

Specifications

Usage
Data
Type
Extension cable
1. Male connector - Type
USB-A
1. Male connector - Standard
USB 2.0
1. Male connector - Quantity
1 ×

Use

Usage
Data
Type
Extension cable

Male connectors

Double-sided connector
No
Male connectors
USB-A

Connector

Double-sided connector
No
Connector
USB-A

Type and number of connectors

1. Male connector - Type
USB-A
1. Male connector - Standard
USB 2.0
1. Male connector - Quantity
1 ×
Maximum throughput of first male connector
480 Mbit/s
1. Female connector - Type
USB-A
1. Female connector - Standard
USB 2.0
1. Female connector - Quantity
1 ×
Maximum throughput of first female connector
480 Mbit/s

Standards

Standards
USB 2.0

Cable construction

Cable length
5 m
Terminate the connector
Straight
More Specifications

RealQ s.r.o. Železná 663/5 619 00 Brno Česká republika https://www.axagon.eu/cs/contact

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

Dobry den, USB kabel (10m) by som chcel zapojit do zastrcky cez adapter a na konci zapojit diody. Bude mi napajanie fungovat alebo budem musiet pouzit dodatocne napajanie ktore sa pripaja na konci USB kabla ? Dakujem

Zdravím, použil jsem tento 5m kabel pro zvýšení dosahu wifi USB donglu. Pokud je wifi dongle zapojeny naprimo je sice wifi slabá ale aplikace na telefonu se k zařízení připojí . Pokud pouziju tento kabel , tak se jeví, že vše funguje, wifi je silná , ale k zařízení se nemohu připojit přes aplikaci . Zkoušel jsem i s přídavným napájením , ale bohužel. Také se mi nikdy nerosvítíla led-link , ale jen červená led-power.

Dobry den, potrebujem prepojit PC a zariadenie ktore ma vlastne napajanie, cize to bude sluzit cisto len na datovy prenos. Potrebujem pridavne napajanie do kablu? ak nie bude to fungovat spolahlivo bez straty dat?

Tento kabel my nefunguje. Zakoupen je na komunikaci PC s PLC. Zkoušela jsem do toho zapojit i flešku ale ani ta nefunguje

Pokud někdo ví o elektřině prd jako někteří hodnotící, tak jenom abyste to pochopili - kdyby byl napájecí konektor na začátku a ne na konci tak to nedává žádnej smysl, to si to rovnou může brát napětí z USB a vyjde to na stejno a těch 5V tam nedoteče, proto je přece logicky napájení na konci aby měl člověk jistotu že tam těch 5V bude mít i po těch 10 metrech. Jo, dalo by se to řešit nějakym 12V napájením na začátku a pak to snížit na 5, ale to už bystě chtěli po výrobcích moc.

Mam usb kabel s wi-fi antenou ale stale se odpojuje, premyslel jsem nad koupi tohoto usb kabelu. Dokaze tento kabel https://www.alza.cz/premiumcord-usb-2-0-napajeci-d250868.htm?o=3 ktery bych zapojil pred tento kabel nahradit na konci externi napajeni ?

Dobrý den , dá se k tomu připojit USB HUB ?

Pokud jsem dobre chapu, tak prodluzovaci kabel je bez napajece ??? Neni soucasti produktu ? dekuji za odpoved.

Dobrý den, kabel jsem zakoupil jako prodlužovací k tiskárně. Pokud je tiskárna zapojena napřímo, tak funguje bez problémů, ale při zapojení přes tento aktivní kabel netiskne. Chtěl bych se tedy zaptat, jestli se tento aktivní prvek nemůže pro počítatč tvářit jako samostatné koncové zařízení a tím docházet ke kolizi v kominikace s tiskárnou. Napájení kabelu je 5V/2A, což by mělo být v pořárku Předem děkuji

Dobry den, potřebujeme poradit náhradu za axagon ADR 210, ADR 205. Tzn. 10m / 5m USB 2.0 prodlužovací kabel s externím napájením. Děkujeme

12
Accessories for AXAGON ADR-205