CARE + PROTECT AQUASTOP 1,5 m

The CARE + PROTECT AQUASTOP supply hose is suitable for installation on a washing machine or dishwasher. Effectively prevents water leakage and possible flooding of the home due to a burst hose. Equipped with Aquastop safety valve. In the event of a leak, the protective jacket directs the water to a mechanical valve that stops the flow. The fault is indicated by a red light on the valve. The hose is fitted with a 3/4" ring with an anti-blocking device to connect it to the tap. The CARE + PROTECT AQUASTOP Supply Hose reliably prevents water leakage.

Key features of the CARE + PROTECT AQUASTOP Supply Hose 1.5 m

• Supply hose suitable for installation to a washing machine or dishwasher
• Effectively prevents water leakage and possible flooding of the home due to a burst hose
• Equipped with Aquastop safety valve
• In the event of a leak, the protective jacket directs the water to a mechanical valve that stops the flow
• The CARE + PROTECT AQUASTOP Hose is equipped with a 3/4" ring for connection to the tap
• Colour design: beige

Procedure for connecting the supply hose

• First check that the tap water is turned off.
• Disconnect the washing machine/dishwasher from the power supply.
• Carefully remove the old hose if you have already installed it.
• Carefully clean both threads of the connection points - on the washing machine and on the tap.
• The tap shall be free of all strainers, perlators and similar built-in parts on the connection side so that the function of the valve is not blocked.
• Connect one side of the hose to the water inlet on the back of the washing machine or dishwasher.
• The other side (with valve) of the new hose to the tap. Make sure the hose is tightened securely, but do not overtighten it to avoid damaging the thread.
• When installing the hose, avoid twisting, breaking and other shape deformations.
• After connecting the hose, carefully check that all connections are tight and sealed.
• Once the hose is properly connected, open the tap and make sure that no water flows from the hose and that all connections remain dry.
• If everything is OK, plug the washing machine/dishwasher into the power supply.
• Once you have verified that the hose is correctly connected and functioning, you can start the washing machine or dishwasher and use it normally.

Length:
1.5m