
You've probably already experienced a power supply interruption just before your work was about to be automatically saved. The unsaved work is irretrievably lost, and you have to start all over again. Such catastrophic scenarios can be forestalled by the EATON UPS 9E 3000i Rack 2U backup source, or UPS. In principle, this hardware is just a large battery that powers all types of computers and devices that need electricity to function. The EATON UPS 9E 3000i Rack 2U UPS uses the Online with double conversion design approach. Off-line is the simplest form. The line interactive UPS also adds data line surge suppression . The most complex system is the online double-conversion UPS, where the input voltage is fed to a rectifier, with output being supplied by an inverter.

The most important attribute is the battery run time. This is governed by the power consumption of the connected devices – for example, at half-load (50%), the battery backup time lasts much longer. The load of the UPS defines the operating time, which at full load (100%) is 8,5 min and at half the energy consumption, it is 23 min. It is therefore essential to estimate the power consumption of the connected computers, monitors and other electronics and it is best to have some extra power left. The EATON UPS 9E 3000i Rack 2U specifies the apparent power as 3000, but realistically, the actual power usage is 2700 W.
Eaton Industries (France) SAS, 110 Rue Blaise Pascal - 38330 Montbonnot Saint-Martin - France, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.