Exelento GSM/LTE Amplifier
- Reviews 1
- Help and manuals
- Specifications
- Photos & Videos 1
- Alternatives 8
- Accessories and suggested products
Exelento GSM/LTE Amplifier
The Exelento GSM/LTE active antenna amplifier is used to boost the mobile GSM and LTE signal inside buildings with insufficient indoor coverage but where the outdoor signal is fine. This device receives the outdoor signal and transmits it to the interior, where it eliminates problems with dropped calls and slow internet. The main unit operates with an uplink gain of 61dB and a downlink gain of 63dB. The device transmits at a power of 26dBm, which corresponds to 0.398W. The system requires an outdoor signal of sufficient strength to operate and is powered by the included 12V DC mains adapter.
Key Features of the Exelento GSM/LTE Antenna Amplifier
- The amplifier supports five frequency bands simultaneously
- The main unit covers indoor areas of up to 1,000m²
- The system is powered by an external 12V DC adapter
- The device has an uplink gain of 61dB and a downlink gain of 63dB
- The powerful transmitter ensures signal transmission with a power of 26dBm
- The main amplifier can handle the connection of three indoor antennas
Frequency Bands and Signal Distribution
The device functions as a five-band mobile signal repeater. It supports GSM 900MHz, DCS E-GSM 1800MHz with LTE 1800 B3, 3G networks on the 2100MHz frequency, and 4G LTE in the B20 (800MHz) and B7 (2600MHz) bands. This combination covers the standards of all mobile operators in the Czech Republic. In these bands, the amplifier processes both data and voice services simultaneously. The system can distribute the signal over extensive areas, and the main amplifying unit covers up to 1,000m² of indoor space. It is suitable for company halls, warehouses, offices or large family homes. The powerful transmitter overcomes the attenuation caused by thick building walls and reinforced concrete structures.
Signal Branching Options
The high power of the main unit allows the signal to be split in multiple directions. The system supports the connection of up to three indoor antennas simultaneously. This way, you can cover several floors of a building or separate offices on a single floor. The signal strength remains sufficient even after splitting the route. The operation of GSM signal repeaters is subject to specific rules of the Czech Telecommunication Office. In general, it is necessary to obtain the consent of all mobile operators whose frequencies the device amplifies before putting it into operation.
Type:
Amplifier
Active/Passive:
Active
Uplink Gain Gp:
61dB ± 3dB
Downlink Gain Gp:
63dB ± 3dB
Transmitted Power:
26dBm / 0.398W
Impedance:
50 Ohm (N connector)
Operating Temperatures:
-10 to 60°C
Coverage (Area):
1,000m²
Specifications
Type
Specifications can be changed without notice. Images are for illustrative purposes only.
