Dorbu deň je lepidlo farbené alebo úplne priesvitne? Pre moje potreby hi nesmie byť vidieť ( musí byť transparentné)
BISON EPOXY UNIVERSAL 24ml
BISON EPOXY UNIVERSAL 24ml
219,-
In stock > 10 pcs at the supplier's
Buy
BISON EPOXY UNIVERSAL 24ml
BISON EPOXY UNIVERSAL epoxy adhesive is suitable for bonding metals, wood, chipboard, thermosets, rigid PVC, laminates, ceramics, porcelain, glass, concrete, stone, marble, rubber, expanded polystyrene, and some plastics (Formica, polyester, Bakelite), etc., both to themselves and to each other. It is not suitable for bonding PP, PE, Teflon, or silicone.
Key Features of BISON EPOXY UNIVERSAL 24ml Adhesive
- Epoxy
- Provides a strong bond
- Suitable for wood, plastic, metal, polystyrene, and ceramics
- High final strength of 170kg/cm²
- Open working time of 90 minutes
- Resistant to water, humidity, oils, solvents, diluted acids, and alkalis
- Heat resistant from -50°C to +80°C
- Handling strength after 7 hours
- Cures after 24 hours
- Fills gaps and cracks
- Can be painted over after hardening
Instructions for use and storage:
The working temperature is +5°C to +35°C. The surfaces to be bonded must be clean, dry, and degreased. Remove the cap from the double syringe. Dispense the filler and hardener in a 1:1 volume ratio (two equal strips) and mix thoroughly. The working time for the adhesive is 90 minutes at room temperature. Apply the adhesive to one side, or to both sides for rough and porous materials, press both surfaces together and secure them (using clamps or tape). Clean the ends thoroughly and close the cap (the cap must be broken off from the double syringe plungers). Store in a cool, dry place.
Safety warning:
Keep out of reach of children. Irritating to skin. May cause an allergic reaction. Causes serious eye irritation. Avoid breathing vapours. Wear protective gloves/eye protection/face protection. Toxic to aquatic life with long-lasting effects. If medical advice is needed, have product container or label at hand.
IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Specifications
Consistency
Application area
Suitable for
Final strength
Setting time
Type
Consistency
Application area
Suitable for
Features
Final strength
Setting time
Full curing time
Connection type
Mixing ratio
Resistant to
Features
Colour
Colour
Packaging
Volume
More Specifications
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
