Ceresit Sanitary silicone CS 25 Express transparent, 280 ml
Ceresit Sanitary silicone CS 25 Express transparent, 280 ml
Ceresit CS 25 Express is a silicone sealant that delivers not only speed, but also top quality and a long service life. This express silicone is ideal for demanding sanitary areas where precision and efficiency are paramount. Thanks to its excellent water resistance, contact with water is possible after just one hour, and the surface skin forms within 14 minutes. It boasts incredible resistance to mould, ozone, UV radiation, weathering, and ageing, ensuring long-term protection and trouble-free performance. It is easy to apply. It has excellent strength, resistance to cracking and colour change, and adheres perfectly to many materials, including glass, ceramics, and anodised aluminium. It contains no solvents, guaranteeing it is environmentally friendly. Ceresit CS 25 Express is the ideal choice for fast, effective, and permanent sealing in bathrooms, kitchens, balconies, and terraces.
Key features of Ceresit CS 25 Express sanitary silicone, transparent, 280ml
- Express drying - surface skin forms in just 14 minutes, fully waterproof after 1 hour
- Durable and permanently flexible - does not crack or shrink, and can handle areas with material movement
- High resistance to temperature, UV, ozone, colour change, corrosion, cracks, ageing, friction, water and moisture
- Suitable for kitchens, bathrooms, toilets, balconies and terraces
- MicroProtect - protection against mould, fungi and microorganisms thanks to its unique formula
- Excellent adhesion to materials such as glass, ceramics, enamel, porcelain, painted surfaces and anodised aluminium
- Easy application
How to use:
1.All surfaces must be sufficiently cured, clean, and dry, free of dust and grease or anything that could interfere with the proper adhesion of the sealant (including frost). Residues of old sealant or other materials on the substrate must be completely removed (use a silicone remover if necessary).
2.Cut the cap at the top end of the cartridge and screw on the application nozzle. The tip of the nozzle should be cut at an approximately 45-degree angle according to the profile and width of the joint. Insert the cartridge into the application gun and extrude the sealant into the joint, ensuring that the sealant makes full contact with the edges of the joint and that no voids remain underneath the sealant. Immediately after application, spray the joint with a water solution with a small amount of detergent (soapy water), remove excess material and smooth with one stroke using a suitable scraper dipped in the water solution.
3.Surfaces soiled with fresh sealant can be cleaned with a dry pad or a pad dipped in a solvent. Any cured sealant can be removed mechanically or by using a special silicone remover. Ensure good and regular air circulation in the room where the sealant is applied. The curing speed depends on the temperature, air humidity and the dimensions of the joint.
Please note:
The colour shade of the silicone is for guidance only.
Specifications
Usage
Features
Technical data
Packaging
Henkel AG & Co. KGaA, Henkelstraße 67, 40589, Düsseldorf Deutschland, [email protected], +49 211 7970
Specifications can be changed without notice. Images are for illustrative purposes only.
