Den Braven Tile Adhesive ULTRA FLEX C2TE S2 20kg
Den Braven Tile Adhesive ULTRA FLEX C2TE S2 20kg
Den Braven ULTRA FLEX C2TE S2 tile and paver adhesive is a cement-based adhesive. It is water and frost resistant, making it suitable for both indoor and outdoor use. ULTRA FLEX adhesive stands out for its high adhesion and tensile and compressive strength, reduced slip, extended open time and S2 class flexibility. It is suitable for bonding natural stone tiles and paving. You can use it when installing large format slabs, extreme formats and jointless tiling. Thanks to ULTRA FLEX adhesive, you can bond to plaster, concrete, aerated concrete, unplastered masonry and old tiles. It is suitable for use when laying tiles with underfloor heating, including direct bonding to electric heating mats. You can also bond to wooden substrates and OSB boards when using an adhesion bridge. You can also use it for skimming.
Key Features of ULTRA FLEX C2TE S2 Tile Adhesive, 20kg
- For tiles and paving
- For more demanding conditions
- Resistant to water and frost
- Suitable for exterior and interior use
- Features high adhesion and tensile strength, reduced slip, and extended open time
- S2 class adhesive flexibility
- Suitable for laying tiles with underfloor heating and directly onto electric heating mats
- ULTRA FLEX adhesive can be used for skimming, bonding to old tiles, wooden substrates and OSB boards
Consumption:
2.5kg/m² at 3mm thickness - tiles
4.0–6.0kg/m² at 6mm thickness - tiles
6.0kg/m² at 6mm thickness on underfloor heating
Limitations:
Not suitable for bonding at temperatures below 5°C and in direct sunlight. ULTRA FLEX adhesive should not come into contact with anhydrite screed; a separating bridge is required.
Specifications
Type
Features
Packaging
Den Braven, Úvalno 353, 793 91 Úvalno, [email protected], https://denbraven.cz/
Specifications can be changed without notice. Images are for illustrative purposes only.
