Entac Direct heating - convector, 3 power levels, max 2000 W, timer

Convector - heating power 2000 W, freestanding, timer, power regulation, temperature regulation and daily timer (24-hour timer), heats a room with a volume of 50 m3, dimensions: 39 × 60 × 10,5 cm (H × W × D), white colour
  1,299,-
Entac Direct heating - convector, 3 power levels, max 2000 W, timer 1,299,- In stock 1 pcs at the supplier's
Buy

Entac Direct heating - convector, 3 power levels, max 2000 W, timer

The German brand Entac electric instantaneous heater with a maximum output of 2000 W can be used to heat a small room, as a support to other heaters or as a backup heat source. Under optimal conditions, the heater can heat a room with a volume of up to 50 m³. In actual operation, the capacity is significantly influenced by the insulation of the heated space, including windows and doors, material of which the walls are made, floor and ceiling, Temperature, but also humidity and other factors. It is equipped with a setting of the desired heating temperature, after which the heating is switched off until the temperature drops again. Use the timer to set the operation time of the cooker for up to 24 hours. At the top, the convector has handles on both sides for safe carrying of the device.

Entac Convector Direct heating - convector, 3 power levels, max 2000 W, timer

Key features of the Entac combi-convector, 3 power levels, max 2000 W, timer

  • Freestanding convector on legs
  • Heating level 750 W, 1250 W or 2000 W
  • Scale setting more or less
  • Functions are set by three rotary controls on the side of the straight heater
  • Equipped with thermostat
  • Overheating protection
  • Suitable for heating a smaller room
  • Possibility to set the operating time up to 24 hours
Entac Convector Direct heating - convector, 3 power levels, max 2000 W, timer

Direct heater functions

The convection heater works on the principle of natural convection, a process in which warm air rises and cold air falls. The convector has an electric heating element that heats the air inside the unit. The heated air rises upwards through the air vents and creates air circulation in the room. The cold air is drawn into the lower part of the convector, heated and discharged up again. Convectors are efficient in that they can heat a room quickly because they do not heat objects directly (such as infrared heating) but circulate air. The advantage is the even distribution of heat throughout the room.

Power supply:
220-240V

Specifications

Compare

Design

Design
Freestanding

Heat capacity

Heat capacity
50 m3

Features

Control
Mechanical
Safety features
Overheat protection
Equipment
Thermostat

Functions

Functions
Daily timer (24-hour timer), Power regulation, Temperature regulation, Timer

Colour

Colour
White

Dimensions and weight

Height
39 cm
Width
60 cm
Depth
10.5 cm
Weight
2.9 kg
More Specifications

Bramcke GmbH, An Gut Nazareth 18A, 52353 Düren, Spolková republika Německo, [email protected]

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for Entac Direct heating - convector, 3 power levels, max 2000 W, timer