FILA PW10 5L

Key features of Fila PW10 impregnator, 5 l

• The impregnator is applied to the back of tiles or sheets of absorbent materials
• The preservative ensures that contaminants do not rise from the substrate
• Fila PW10 impregnator prevents the formation of unwanted stains and smudges
• Fila is applied before laying
• Specific preparation suitable for natural stone, marble, granite, agglomerates, paving and absorbent materials
• The impregnator leaves the treated material breathable
• The product does not change the adhesion properties of the adhesive and the joint
• Fila PW10 impregnator is an ideal choice for stairs, floors or tiles

Method of use:
It is a ready-to-use device. Clean the back of the tile or board to remove dust and other debris. After the surface has dried, apply the product to the back of the material with a wide flat brush in a smooth manner. Allow the floor to dry for approximately 24 hours before gluing the floor by resting the boards on each other with their backs. The impregnator is intended for professional use only. On vertical surfaces, apply the product by spraying and dose it until the surface no longer accepts it.

Volume:
5 l