Catalogue

JTS E-7R/E-7TB + CM-501

Wireless System - E-7R receiver, E-7TB handheld transmitter, UHF, PLL synthesis, 16 selectable channels, transmission frequency 470~960 MHz, transmitter power supply 2xAA, condenser electret lapel microphone CM-501, 4P mini XLR connector, Cardioid, 100 Hz - 15 kHz
  4,190,-
JTS E-7R/E-7TB + CM-501 4,190,- In stock > 5 pcs at the supplier's
Buy

JTS E-7R/E-7TB + CM-501

The JTS E-7R/E-7TB + CM-501 wireless microphone system is a complete set for professional audio recording with high quality and reliability. Includes E-7R single channel receiver, E-7TB bodypack transmitter and CM-501 condenser lapel microphone. The System provides users with 16 selectable channels for flexible setup and minimized interference. Its stable RF connection and excellent audio performance make it the ideal choice for a variety of professional applications, including lectures, conferences and live performances. And all this at a very affordable price.

JTS E-7R/E-7TB + CM-501

Key Features of JTS E-7R/E-7TB + CM-501 Wireless System

  • The JTS E-7R/E-7TB + CM-501 Wireless System offers you excellent audio performance
  • Includes single channel receiver, bodypack transmitter and lapel condenser microphone
  • The E-7R wireless receiver has 16 channels
  • It is equipped with a 6.3mm jack
  • Connect the E-7TB transmitter to the microphone via a 4P mini XLR connector
  • Gives you up to 30 hours of operation
  • The CM-501 microphone has a directional cardioid characteristic
  • Supplied with wind protection (windbreaker)

Wireless receiver E-7R

The E-7R receiver is a professional wireless receiver designed for reliable and high quality audio reception in the UHF frequency band with PLL synthesis. With 16 channels and a transmission frequency range from 470 to 960 MHz, this receiver offers flexibility and the ability to select the optimal channel for seamless operation. With a signal-to-noise ratio of more than 100 dB and harmonic distortion of less than 0.6% at 1 kHz, the E-7R delivers clear and faithful audio performance. A 7-segment display shows channel and RF/AF status information, while controls allow easy power adjustment, channel selection and volume adjustment. The audio output level reaches -15 dB, ensuring optimum volume and sound quality. The receiver operates with an operating voltage of 12V and current consumption is 150 mA. The output connector features a single symmetrical 6.3mm jack that allows easy connection to other devices. With dimensions of 210 × 40 × 170 mm (W×H×D), the receiver offers a compact design that integrates easily into your setup.

JTS E-7R/E-7TB + CM-501

Pocket (bodypack) transmitter E-7TB

The E-7TB handheld transmitter is a compact and powerful wireless audio transmission device with high reliability and flexibility. Thanks to PLL synthesis, it offers stable and accurate signal transmissions. With a transmit power of 10 mW and a frequency response from 40 Hz to 18 kHz, it provides wide coverage of the audio spectrum. With an acceptable ambient temperature of 0 to 40°C and a ±48KHz tolerance, it is suitable for a wide range of applications in a variety of environments. The 7-segment display shows important information including channel, battery and on/off status and mute level. The controls allow for easy setup, including on/off, channel selection and activation of the Mute function. The 4P mini XLR input connector ensures reliable connection to external microphones. The transmitter is powered by two AA batteries (not included), which ensures a long battery life of over 30 hours of operation.Weighing only 80 g, it is very compact and easy to carry.

JTS E-7R/E-7TB + CM-501
JTS E-7R/E-7TB + CM-501

CM-501 lapel microphone

The CM-501 lapel condenser microphone is designed for precise and sensitive sound recording with high quality and reliability. It is equipped with a 4P mini XLR connector. Its cardioid directional characteristic allows for effective sound pickup from the front direction and suppression of unwanted ambient noise. With a frequency response from 100Hz to 15kHz, the microphone can pick up a wide range of sound frequencies. An impedance of 2.2 kΩ and a sensitivity of 3.2 mV/Pa/1kHz ensure high microphone performance and sensitivity. Maximum sound pressure of 130 dB supports loud sounds without distortion. The microphone is powered by connecting to a body-pack transmitter series IN/PT/UF. Weighing only 20 g, the microphone is lightweight and easy to carry, and thanks to wind protection (windshear) it is protected from adverse atmospheric conditions.

Specifications

Technology
Analog
Number of channels
1
Frequency band
UHF
Frequency from
470 MHz
Frequency to
960 MHz

Characteristics

Technology
Analog
Number of channels
1
Frequency band
UHF
Frequency from
470 MHz
Frequency to
960 MHz

Features

Power supply
AA
Transmitter type
Lapel
Features
Battery indication, Display, Noise suppression

Connectors

Receiver connectors
Jack 6.3 mm
More Specifications

Audioworks Music s.r.o., Lafayettova 42/14 779 00 Olomouc, [email protected], +420 588 491 044

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for JTS E-7R/E-7TB + CM-501
Try our cookies Alza.cz a. s., Company identification number 27082440, use cookies and other data to ensure the proper functioning of the website and, with your consent, also, among other things, to personalize advertising and the content of our websites. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
Detailed settings
Alzak icon
P-DC1-WEB16