SimplyMed LT-F20
SimplyMed LT-F20
The SimplyMed Fingertip Pulse Oximeter model LT-F20 is an innovative medical device that provides continuous and non-invasive measurement of SpO2 and heart rate. As a compact instrument, it is very easy to use and carry, while at the same time ensuring fast and accurate measurements. The pulse oximeter works by applying Lambert-Beer's law to match the spectral absorption characteristics of reducing hemoglobin (R Hb) and oxyhemoglobin (O2 Hb) in the red light and near-infrared light spectrum. The principle of the device is to combine photoelectric oxyhaemoglobin control technology with volume pulse sensing and recording technology so that two lights of different wavelengths (660 nm in the red wave spectrum and 910 nm in the near-infrared wavelengths) can be focused on the human fingernail using a finger sensor with a clamp.
Key features of the SimplyMed LT-F20 oximeter
- Fingertip oximeter, suitable for adults
- Measures saturation from 35 to 100% and heart rate from 30 BPM to 250 BPM
- Measured values are displayed on the TFT/LCD display
- The product does not have an alarm for SpO2
- Continuous monitoring time in the same position should not exceed 4 hours
- Low consumption
- High precision
- Easy to use
- Compact size
- Medical device, read the instructions carefully before use.
Method of use
1. Insert two AAA batteries into the unit and close the cover.
2. Open the device by gently pressing the back of the device. Insert your index finger into the rubber hole of the pulse oximeter (make sure your finger is positioned in the middle of the hole), then clamp the oximeter on your finger.
3. Press the button on the top of the unit (START/MODE button), the unit will turn on.
4. Do not move your finger when it is placed in the oximeter. Do not move other parts of your body - this may affect the measurement results.
5. Once the screen shows a stable value (approx. 3-4s), the display starts to show the measurement result.
6. After removing the finger, the device switches itself off within about 15s.
7. If you will not be using the unit for an extended period of time, remove the batteries from the battery compartment to prevent them from draining.
8. The pulse oximeter is not suitable for continuous monitoring or measurement of newborns and infants.
Device dimensions:
58,8 × 36 × 34 mm
Power supply:
2 AAA 1.5V alkaline batteries (baccessories included)
Scope of SpO2 (oxygenation) measurement:
35 - 100 %
Heart rate measurement range:
30 - 250 BPM
Specifications
Product characteristics
Type
Functions
Measuring range
Packaging
Battery
Variopharma s.r.o., Pražská 1109, Nehvizdy 250 81, Praha-východ [email protected], +420 735 115 981
Specifications can be changed without notice. Images are for illustrative purposes only.
