Soler&Palau PULSE 160 small, residential, white

Do you love to ventilate your home, but could do without the cold draught from outside? The Soler&Palau Ventilation Group heat recovery unit, with an efficiency of 81%, is the perfect solution. It supplies healthy, fresh air even in areas with high pollution. Even without opening the windows, only clean air will flow into your home or other non-residential spaces. The minimum noise level of the heat recovery unit during operation is 14dB(A), and the maximum is 23dB(A). The unit includes a humidity sensor. This heat recovery unit is designed to operate in temperatures from -20 to 60°C.

Key features of the Soler&Palau PULSE 160 small residential heat recovery unit, white

• Room heat recovery unit helps to ventilate spaces with high humidity
• The efficiency of the Soler&Palau Ventilation Group heat recovery unit is 81%
• Air inflow is 16m³/h and outflow is 43m³/h
• The heat recovery unit requires a 160mm diameter mounting hole
• Minimum power consumption is 0.9W, maximum is 2.8W
• Equipped with a humidity sensor
• The device has 4 speeds
• Filter classification: G3
• Product control: remote control and manual
• Minimum noise level during operation is 14dB(A) and maximum is 23dB(A)
• Its colour is white

The Soler&Palau Ventilation Group heat recovery unit will delight you with its practical functions

The Soler&Palau Ventilation Group room heat recovery unit is equipped with features for convenient use. A core component of the unit is the counter-flow heat exchanger. In the exchanger, thermal energy is exchanged between the warm exhaust air and the cold fresh air from outside. During this exchange, the exhaust and fresh air do not mix; only energy is exchanged. A high-quality material, specifically ceramic, was chosen for the manufacture of the exchanger. The automatic mode tells the unit to operate according to a universal programme that you set yourself. If you need increased ventilation, you can use the designated temporary mode. The unit also monitors filter contamination itself, ensuring you always get the best performance. You can easily control the device using the included remote controller. You can also achieve great results with manual settings. An important safety feature is overheat protection. When connecting multiple units, the built-in logic for synchronised operation can be used, enabling control from a single point.

Installation of the Soler&Palau Ventilation Group heat recovery unit

Correct installation of the heat recovery unit is crucial for the flawless operation of the device. It is therefore important to follow all the manufacturer's mounting recommendations. Before you start the installation, you will need to drill a 160mm diameter hole in the wall. The Soler&Palau Ventilation Group heat recovery unit is designed for wall mounting. The manufacturer recommends installing the unit at a height of 100cm. The minimum wall thickness should be at least 280mm and the maximum 500mm.