
The ROCK Harper travel case is made of TPU polyester, which has superior mechanical properties, including abrasion resistance, chemical resistance, tensile strength and higher cut and tear resistance than regular polyester. The case is zippered and both zipper sliders have a loop for convenient attachment of a code or key lock. TSA code lock is included in the case. The case can be increased in internal volume with a second zipper. In the front there are two smaller pockets with zipper closure and nand there is a zipped pocket on the inside of the lid. The top and side handles are padded in the colour of the case. The entire mobile system is housed inside the case under a fabric lining to prevent damage to the system during transport, and is fitted with four double 360° swivel castors.



You can change the combination of numbers using the following procedure:
1. Set the combination on the lock to open (the manufacturer's preset code is 0-0-0).
2. Push the reset button with a pencil or other pointed object until you hear a clicking sound.
3. Set your new number on the dial pad and remember it well.
4. Push the PUSH button in the direction of the arrow.
This will return the reset button to its original position and you will hear a click. At this point, a new numeric code has been set. If you wish to change your code number, simply repeat steps 1 to 4.
Opening the lock:
Release the zipper sliders to open the trunk by entering the correct code and pressing the PUSH button in the direction of the arrow (the factory code is preset to 0-0-0 if you have not already set your own code).
Authorised Rep Compliance Ltd., Ground Floor, 71 Lower Baggot Street, Dublin, D02 P593, Republic of Ireland, www.arccompliance.com
Specifications can be changed without notice. Images are for illustrative purposes only.